924dr

the intake boots are in good condition i will try an get pics up tonight for ya all the parts minus the cylinders and crank came off my 96 shee the cylinders an crank came from a 93 parts shee

i am cleaning my parts shelf off this is all random items so here we go stock swing arm $10 stock front bumper $10 handle bars with blue renthal pad $10 stock steering stem $10 stock intake boots $10 stock crank has bad rod bearing $make an offer coil $5 cylinders bored 66.00 set of 2 keihin pj carbs the serial #67ra2rgp/67ra2rdh i was told they are 34mm carbs they are flat slides not sure if they are 34mm or 36mm $ make offer on these i will have pics up tom once i get my wifes camera or if you want pics now i can send them via text 513.293.9273 my name is justin

it has an oversized rad in it a brand new water impellar i will have to have my cousin get on here to give the details on the porting i think it all started when he pulled it out of the back of his truck an it sat up right (front wheels in the air an it resting on the rear wheels an grab bar) from then on it sprays out the coolant from the resivor vent tube as far as an air bubble i think he checked for it but i will double check or have him post up on here thanks for all the ideas so far justin

We checked the dome gaskets they looked good not smashed or anything Anything else come to mind

i need some help with this i cant figure it out. my cousin jus had his shee built with the vitos big bore kit in the stock cylinders with a hemi head an 24cc domes the issue is the coolant will spray out the overflow vent tube so we block the over flow on the rad. an no sooner did we did that he rode it for maybe 10 mins then it blew the line of the top of the head so what would that be any help will be awesome thanks justin

i am in need of a left lower a arm. Mine took a poop on me this weekend so that is what i need. pm me or respond on the thread i will check it when i can.If you have both lowers an dont wanna sell seperate then i will buy both. im located in cincy ohio 45240 i need a price shipped thanks justin

bump

i am in need of a few parts for my shee if you have them an aer in fair/good shape then i have the monies to pay ya 1) rear brake disc stock but will settle for aftermarket no bends or cracks please 2)air filter an outer wear i have a pwk 36mm carb so i need a filter that fits that 3)stock rear axle no bends let me know what you have thanks justin

here is a pic of the 2 into 1 kit here is the .050 over cylinders the extended studs are not included this is a pic of the damaged one and its not bad at all prolly could do a lite hone and rock it i will get more of these cylinders here is the .080 set of jugs

sorry i thought i pm'd you back i will pm you now

bump it up

im located in cincinnati ohio i have a few things that i am wanting to get rid of so i can start my new build here is the list stock crank still in the shee $ 130 + the ride .050 stock cylinders they will need to be bored the ring dug into the cyl. wall $ make offer .080 stock cylinders $ 100 + ride front and rear (red) plastic the rear has a slight crack in it $ make offer 2 into 1 carb kit 35mm pwk uni filter throttle cable $ 185 +ride +8 stock style swinger comes with extended s.s. brake line $ make offer i dont have pics of the 2 into 1 kit or the .050 over cylinders but i will get them once my wife gets home justin

im not real sure what a cheetah pv is but please explain

so here is what i got going on i wanna build a mean trail shee but still be able to hit the strip up so this is what i was thinking 1. cub build but i have no clue on how to go about this and the search method dont like me lol 2 4 mill with an aggresive trail port which would be more trail friendly but still put out +8 swinger wheel stands lol im sure this is been gone through a bunch of time and i tried searching but it keeps telling me there is an error so justin

jus a pic to show i put them in the motor build

the tire size is 22x11x10 i think as far as the price i jus put up a price i really dont want to sell it but i did all this to make the wife happy lol

some old pics i tore the whole thing down to bare frame and painted it metalic silver

whats everyone, its time to sell one of my toys and this is the one that has to go so here it is 1996 banshee yellow and red mods renthal bars scott grips +8 extended swing arm douglas rims fronts and rears lowering block nerf bars (red nets) new rear tires (swamp witches) new front tires (razrs) motor mods ricky stator adjustable timing plate ( +4 setting) ebc dirt digger clutch (not installed yet) .050 bore wiesco piston kit ( 10 hours total on topend) cool head 20cc domes 2 into 1 intake 34mm kiehin pj carb ( i have to so you can run dual carbs) v-force 3 reeds (10 hours total ride time) uni air filter o-ring chain ( uber long lol) pro circuit pipes extra parts 36mm pwk kiehin carb stock swinger stock front rims front plastic ( brand new cond.) rear plastic (there is a crack on the right rear) extra set of jugs im sure there is more to add also the shee will be nice and clean in the next day or two as for the price im going to start it at $ 3200 obo trades 450r quad or quadzilla 500 the parts and quad will be washed

we got there at 9:30 this morning and it was nasty i have never been muddier lol

hey guys i will be there for sure on sat with a few buddies rain or shine unless is straigh down pouring then it will be to muddy but we will be there sat morning by 930 if all goes well justin here is my number 513 293 9273 text me or call as well if its to crazy

anybody got any info on this unit justin

my cousin bought a amr cdi rev box for his shee this is the problem his shee is a 95 and the box is for 97-up and the grey plug on the harness is four wires and the plug on the cdi box is a 5 wire plug so my question is can i bypass one of them wires for it to work or is it pointless to try thanks justin

whats up guys im back in for riding i got my new rear tires today and i got so jank front tires to rock for now but i dont think ill be campin the guys that are coming with me only wanna ride sat. so what time is everyone meetin up on sat justin

sorry my computer was actin up i got the pics now

whats up guys, i dont think ill be making the trip for the 15,16 due to riding at haspin this past weekend. i had a run in with devils back bone and i made it out ok but the shee took a beating lol not really but i bent a rim and busted two tires so i have to try and round up some spare tires and rims sorry guys justin