NCBANSHEE

i sent 35's i already talked to carl

Well like i said these carbs come off of a running bike they were bought at sleighs motorsports park off of bike that runs consistent 4.10's. I got in contact with the guy and asked him this morning to read what was going on he said honestly they tried to take advantage of a new member.Thats right i had these same carbs on my bike for a while no problem had a cracked reed from running oxygenated fuel and leaving it in the tank and it gummed my reeds up and eventually they cracked. So all this one carb different shit is bs and i dont appreciate it like i said 200 will not make me or break me and yes those cylinders may be crap to some people but stock shit is always crap in my opinion, if thats the case go and bore your fucking stock pipes lol. It seems like these two guys are on a budget and try to fuck me because i was a newbie, within a few hours of posting he replied i will take them i was like wtf no pics or nothing and he didnt even ask no questions i felt a little suspicious from then. He said the pics were as the carbs came now he fixed them up bs bs bs bs bs save it buddy. Those are not the fucking carbs i sent you and you know it carl you are very sneaky what comes around goes around. I hope #1 banshee come with you when i come up there talk like a man face to face and not behind a damn keyboard. To the admin you can ban me from selling because like i stated prior i will not buy sell or trade unless its a official business or local. Like i said before i have one of the best if not the best banshee mechanics in the world freddy from sanford atv his performance is guaranteed. You guys will soon see once i blow you guys away helpful advice if you dont have nitrous get it but you are still going to lose im out

hell even the sudco stickers looks phony carl look at it compared to the pics come on buddy

I was told that you got to watch yourself in some states especially (where r u from again Carl?) but i didnt know it was this bad. Damn try to take candy from a baby it's pathetic hell this site is good for swaping etc but i will not participate in the forsale section, again and i have good parts for good deals but i will let them rust before i give them away (CARL). 4.After reviewing the pics again carl i notices that i had two gas line clips to keep the lines close to the carbs didnt see them. 5. Hey carl where are the 2 stripped phillips head screws at the bottom of the carbs. Now im not telling which carbs had what incase you want to further this non-sense, im no longer entertaining this bs i will call you tommorrow and we will go from there good try

For the record i dont visit this web site daily would love to but my agenda is to full. Hey Carl thanks for the photo's and good try. First and foremost i would never try to screw someone over 200 dollars for some carbss. 1. Carl the 35's i sent you had one carb with the choke knob cut in half so it could clear my boost bottle dont see it. 2. Carl the 35's i sent you had one carb with a grooved floatbowl screw from my clutch hitting it dont see it. 3. Carl i told you and the site that the idle screw was damaged and you birdbrain didnt even have that particular carb in the fucking pic for crying out loud, let me guess you fixed it then took pics save it buddy, you stated clearly this how they appeared out of the box well the idle screw ????????????????? save it buddy. I will call you tommorrow around lunch time thanks for the attempt to screw. All the info i stated is self evident and is the truth thanks hq.

http://i671.photobucket.com/albums/vv77/je...84/banshee3.jpg http://i671.photobucket.com/albums/vv77/je...84/banshee4.jpg

This is what carl said im not boasting bout my bike he called it junk i will take these junk cylinders and make him sellout guarnteed. Look he wanted me to send him a pic so he could justify the difference, he think he has a no brainer. Will not post my pics until we get admin involved carl apparently im not the first person you try to screw because for you to be a veteran member i have members with more posts than you saying you are known for this once again thanks but no thanks for the trouble. [b]Stated by Carl[/b] Now your being an asshole Ill send them to you you can see 4 yourself or better yet just swing thruogh when your in town . Is there any way u put two diffrent carbs in box and shipped them. If u would think for a min and remember this is my first time ever using paypal and this is what i get By the way i had six site members that were here working on there bikes getting them ready for glamis when carbs were delivered they all said wtf and your reputable builder suond like junk to me if he would even let u run those sleeper cylinders(junk).Its not my first time in a garage i used to make a living at it till i got a real paying job and its pretty obvios u were out to screw me all the way send me the pics of the carbs or u lying about that too

I recieved a pm stating that carl is trying to screw me that he fucked up the carbs and that he is known for this i would like for a adminastrator to open my account and view it with there own eyes. Im not talking trash i never said anything about carl he came off at me with my crappy sleeper cylinders i can care less what he has done to his bike dont knock mines he stated on my cylinders first i bought them just to be trying something different and yes matt shearer has me flying. Come on carl take a pic of the carbs on the other side i dare you to post it

why did you have a camera out for some 200 dollar carbs you had intentions on screwing me from the beginning did i or did i not ask you if you wanted pics carl. I just imagine if these were more expensive parts wtf is the economy that bad do you want me to give you my parts be foreal.

a sleeper do me a favor and flip the carbs and take pics as how the carbs will be bolted on the bike that will tell it all i have my pics and will go as far as getting the law involved i am a business owner and do this just for fun. My post count is not high because i have other things to do besides bang a key board about fourwheelers its a good site that is very informative about banshees and troubleshooting etc. Im not going to argue with you anymore i will prove to you that your wrong and when i take my trip to ny and smoke you i will put the race on banshee tube and you tube as a embarrasement since my cylinders are junk ask matt shear how they made 115 on the dyno smart ass Have a nice day and you have me telephone number you called me several times i have yours too 516... .... so do not act like you cant contact me Mr. Carl. By the way you almost had me with this sad song until you posted those pics are you sure you got the carbs i sent you in the pic dont take my post count for granted i have 3banshees and owned over 10 fyi and my vito's is a 1/5 tenth slower than my rdz cheetah cub you intelligent stock cylider smart ass (Damn new yorkers )

sleeeper is a lying sob stickers not on the carb here are a few pics that are on my laptop will have more from my pc later not even close he's full of it and wants something for nothing i told you the carbs were used and that they mearsured 35's i told u that it was something different bout the slides you said ok i work on them blah blah blah i said cool send me the money jus cover paypal and i will cover shipping a few pics of my carbs thats bs i will only do local sales and continue to buy and sell from the track for this reason only. You not goin to screw me so you can buy some chettah cylinders or what ever your attentions i of should of known (banshee on a budget).

35 pwk's sold but i have some 34mm pj thats bored to 35.5 that scream for 200 as well

kehin 35mm gas carbs didnt work very well for application 200 obo

what was the problem