Pyrojunky619

or if you want one that is not milled, ill trade you mine

what about a 14T front sprocket

anyone got a 14T Front sprocket? how much shipped to 19804?

have any sets of bead lock rims also, do you have any 10 inch rims ?

So im youtube today looking around, i come acrost a video, that had a shee with some 916's any one know where i can get a set or are these the ones dmc stopped making, i know it was one of there pipes but i forget just what set.

also check you reeds

Its actually for the tires/hiper carbon fiber rims on my Micro sprint car. So it works good on the rims i have for my shee.

This is what i have http://www.speedwaymotors.com/eccStoreFron...910-82001_R.jpg

On the bogging, what do your reeds look like, check them to make sure they get a good seal an maybe some new plugs.

also check the reeds on the side thats not firing, make sure they have a nice tight seal on them

what are the carbs like ? do they have the tors still or has it been removed.

what are you running for oil?

Port an Polish. You have the polish part some what right. Polishing is when you take the Ports in the cylinders, an make them super smooth. The smoother the ports become, the better the air an fuel will flow. Porting. This is where a person such as F.A.S.T racing / Kevin Hurr takes the cylinders an grinds on the ports, this is the key to make monster HP. You do not want to try this your self unless you absolutely know what your doing with two strokes. you do a little to much to something, it could run like a raped ape, but blow up often or not even run right at all.

had that happen to me! it was the bottom one and it cought the sprocket an bent the bolt. now i hang on the bolts an but a light dab of blue lock tight on them

http://www.klotzlube.com/storeProdDetails.asp?pi=45 this is what i use, works good. hey it even smells good too!

Ah right up my ally ! i use these motors on my micro sprint car. Yes you can have it bored, but it will have to have a steel liner put in to the cylinder or jug what every it may be in your case. the best bang for the buck on them is stroke it. its 72stroke x 66.4 bore. make it a 77.5 x 67. add a load of fuel to it, an watch it run.

Do you have the chain adjusters?

plugs are 13/16

Alright, im a new guy here. Just wanted to say that this place is awesome.! Anyway i have a 2001 shee. Just had the cylinders bored .20 over. just put her all back together on friday ( 7/11/08 ) and today i fired her up an im dealing with the same problem that i had before. it'll only idle on the left cylinder. Then when you get on it, it'll backfire on the right side then every thing is ok. runs great! pulls hard in every gear. Every thing is 100% stock except for the pistons there wiesco. i'v cleaned the carbs. when else could i be missing. the plugs are brand new. only have about an hour an a half of them. they dont show any signs of anything ab-normal. Im lost on things to try any one got any more ideas for me to try? Thanks Mark .

klotz, the supertechplate (spelling) stuff.

Anyone want amsoi? shoot me a message. Im a Amsoil Dealer.

Not to hijack your thread but is anyone here a dieselplace member, Im Bigtruck bigpower. over there