jb73

The a arms dont fit at all if switched. It is at 15 degrees caster - way to much, so i called the company and thay said that the shock mount was to high on lower arm. So they're going to make another set for me.

The caster is set at 1 1/4 back on the uper a arms. if i go any less i have shock interference where the arm has the bend to come back to hyme joint.

Here are some pictures of the new setup. The toe is set 1/4 in on the front and the camber is 1/4 in on the top.Do all the +2 +1 get harder to steer.

Fireball racing a arms +2 +1 - does anyone have a pic of this set up? I have yfz 450 shocks and this thing steers hard as hell. Maybe a arms need more ajusting?

do you still have them?

Hi guys, I did Ricky Stator dc conversion to run a fan system 14.5v to 15.2v at the battery just above idle. Then if you raise rpm W.O.T. two yellow wires get hot, rectifier/regulator gets smokin hot, system stops charging, drops to battery voltage, fan pulls about 40 watts. I talked to Mike @ Ricky Stator and he sent another rectifier/regulator. Still no progress, any help would be great.