ASRBanshee
-
Posts
122 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by ASRBanshee
-
-
The DMC head pipe will work with both the aliens and the 916
I know but the midpipes are different. The 916 midpipes need to curve in a little more to reach each opening in the silencer. Right?
-
Put it in first go a little bit and then punch it and the front should come up. If not, thats why you can use your back up which is using the clutch to get it up which I dont recommend.
-
I am pretty sure the midpipes and the silencer is different on the 916 system rather than the alien system.
-
Elevation, Airbox specs?
-
No such thing as 305 mains. It goes in intervals of 10. I would try 330 mains and 27.5 pilots.
-
T-6's can work killer even with a mild port job. People underestimate them.
-
310-320 depending on what pipes you have?
-
If there are dents in it and he says that you only care about function. The dents will affect the function, which is delivering power.
-
Your giving numbers and not all the airbox mods are listed. 320 mains?? what if he is running a stock filter with cage you dont want to be higher than like a 260. Again filter brand is essential.
-
first off what filter is it?
-
throw that piece of shit stock cage out and get an adapter plate that is secure. Then get your jetting right. If that is your only option and you have the whole lid on with the snorkel, how is the bike running throughout the throttle range
-
Someone broke into my house and took my banshee for a joy ride and the heim joint bolt that secures the lower a-arm to the caliper loosened up and got lost. Can someone tell me where to get a replacement.
-
my idle screws dont seem to do jack shit
-
turn your screws all the way in. Then go out 1/2 a turn at a time until the bike idles at the highest point. If the bike idles at the highest point at 1 1/4 turns out or less you need a bigger pilot.
-
Yea no reason you should be running 40 pilots. It goes #15-35 in increments of 2.5 and #35-65 of increments of 5. You want a 27.5 pilot but make sure when you specifically ask for them you say banshee pilot jets. Because the mikuni pilot jet that fits most carbs DONT fit banshee carbs. As far as the mains you want to be like 320-330 mains.
-
Ya manuals especially clymers are good. The main jet isnt connected to the cable or slide. It is sitting on the bottom of the carb where the floats are. Take the carbs off and unscrew the 4 screws on the bottom of the enire carb. You want to be at like a 320 main.
-
K&N or UNI clamp on's?
-
give this place a call they probably have one left over in their warehouse.
-
probably a 2-1 dynoport exhaust. Good for the low end power though
-
and what type if filter
-
I love the sound of DMC 916s. Wish I could find some!!!
Last time I checked this company had a few leftovers. www.splashndirt.com
-
As far as the radiator hose my company puts a dent in the pipe to prevent them from touching but in your case just find a heat repelling tape and wrap the radiator hose with it so if they do touch nothing happens.
-
1) What type of aftermarket exhaust do you have? DMC Aliens
2) What type of airfilter do you have? K&N & Powerlid
3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all/ Stock airbox Filter lid
4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) 1200'
5) What size pilot jets are you using? 30
6) What size main jets are you using? 310
7) What temperature is your Banshee jetted for? 70-90
8) Do you have a port job? Stock port
9) What kind of carbs? stock
10) What size carbs? 26mm
-
Making the fuel/oil ratio higher will make the bike run richer. You have nothing to worry about so throw that worry out the door. Running at 32:1 will make the bike run more lean with the jetting rather than running 50:1 which will make the jetting a little more richer since their is more fuel to burn.
DMC 916's
in Jetting & Exhaust Forum
Posted
Start a "DMC 916 reproduction" thing get a hell of a lot of people to sign it and mail it to DMC maybe they'll give you a free set