djberg

sorry listed it on ebay as a whole http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280560497104&ssPageName=STRK:MESELX:IT#v4-37

2001 banshee stock width other than rims are reversed to make it wider. has a modified airbox, sst pipes and silencers. and a set of ac nerfs. the rest is stock. parts not on bike. spare set of 64mm stock cylinders(came off a 2003) another set of 65mm stock cylinders(needs bored they were on my 1995 when it blew up) plus brand new never installed vito's +2 rear axle. phat head with 23cc domes. spare set of gncc 21x11x9's on stock banshee wheels(straight) full spare set of blue no cracks with yellow fmf graphics plastics. plus the other bike a 1995 that i blew up and was going to powder coat the frame(stripped and shaved but never painted). crank is bad threw a connecting rod bearing. plus the rest of the bike but it's in totes. the pic is of the 2001 when i just got it. newer pics coming soon. i live in jamestown, ny 14701 google it. (technically bust ny but you'd never find it on a map) Price is $2500obo for everything i dont want to screw around with parting it out. you can if you want. but i dont have the time. but i will take a nikon d700, d3, d3s or a d300 with a really good piece of glass attached(lens) in trade. no other cameras will be considered cash only in person unless i am delivering, then it's a dollar a load mile with everything prepaid through paypay. thanks dj berg oh and if your bored check out my photo site http:/www. djthephotoguy.com i just finished up posting all the trikefest shots and nest i'll be adding a little art. more pics coming tomorrow. ps email me any questions @ [email protected]

stock pipes/silencers....

230? or 330? i have 280's in it and she's rich

30 degrees 1200' elevation, stock 26mm, unbroke in motor, need a base line oh yeah open airbox, and shaved head .030" thanks

what size are those carbs? stock?

ya think you have the screws for the plastic still? if ya do let me know and how much you want for them? thanks again dj

last two burton 181cm pics

ihad quite the quest trying to get batteries for the damn camera i have a bad habbit of hiding things that i'll know just where they will be when i want them again... :ninja: then havin' one hell of a time trying to find them... :: so here's the pics... ride bindings burton bindings... Bansh-eman... here's a pic of a burton 4x4 specific base plate... the ride 163cm the burton 181cm let me know what ya got... thanks again dj

simply erase all doubt... i think they are only like $20

got some snowboards that i wanna trade take a look see if your interested let me know... http://www.bansheehq.com/forums/index.php?showtopic=87996 thanks dj :beer:

i know what you are talking about burton does make 3-d and 4x4 plates but the ones i have are 4x4 specific... you'll see when i get the pics up... ps hello to one of what i have come to see as one of the best wealths of knowledge on this forum

fmf sells a kit that will give you springs and seals(o-rings)

oh yeah that drag shee is awsome i'd love to have one but not so into just going straight and don't have the money for a once in a while toy like that... but maybe one day when i make millions i'll build one... right around the time i can afford to go to glamis every weekend... :yelrotflmao:

yes they will exept for the "bolt patern" on them is 3-d of which is totally different from any other company... but you can get them at any burton dealer or even (poop)dick's sporting goods... let me get bancheez over here with his fancy computer picture taker thingy and i'll have them up so you can see all... ps what board are you riding?

well man put'er this way look in the trades area i put my snowboards up cause the wife cannot say anything about them they are actually mine not "ours".... i'm on the hunt right now for suspension and extension(other than swinger... shorter...) mx/ trail goodies oh yeah and as we all are searching for a truely straight banshee frame AND sub-frame...lol thanks though

which bindings? rides? or burtons? the burtons have 4x4 disks and the rides i don't even know if i have the plates... i just moved this summer nd we are in the process of a full remodel of the house, so those plates could be any where...

lowest budget as possible i still have a few other bad habits... WIFE!!!!... remodeling my house... 2 great danes and a half lab half american pit.... oh yeah and lets not forget replace the rear end in the ol dodge...

yeah i hae no idea about the whole boot mod...? also i see "stock" carbs listed as 26's and 28's on e-crap, and my banshee mentor bancheez says they're 28's? the bike is mainly a 94... the bike came in a box... we bought it in august and finally got er together last weekend for the most part we just need the phillips head plastic mounting screws

i have a 2002 ride mountain 163 mint cond. very little use(got from rich kid who's momy and daddy bought it for him for x-mas and he rode it twice only to decide that he was not a snowboarder... a 2001 burton canyon 181... this thing is nuts, also in perfect shape, truely one fast deck ultra fun and just a ride of it's own... one set of blue ride lx bindings ... one set of burton mission bindings in the general lee colors.... one pair of 2001 burton viking boots sz 11 i need a pair of stock shock length +2 +1 a arms, -1 swinger with carrier preferablely, after market shocks(let me know what you got), +2-+4 axle, pro-peg nerfs or anything else fun you might have to trade... and i don't care if they are scratched up or what ever just as long as they are straight... thanks dj

no shit good to know....

so i've been told that a 2mm bore job on stock carbs can be a real waker upper.... opinions? comments? trying to keep the machine as stock looking as possible...

cool beans good luck with the sale... dj

do you snowboard? if so i have a ride mountain 163 i'll trade ya mint condition... dj

http://www.majestictrails.com/ as it took me all night to find the right dirt wheels.... the damn thing was sitting right next to the computer... :: :: :: :: by the way that passion motor sounds fuckin sweet! did they ever finish that cr 1000 shee?