ironrhinodesign

Ok many people have concerns about the history of aluminum tanks cracking. Here are our new mounts that come with our tanks. These mounts bolt directly into the frame and then the tank bolts to the mounts. The two bolts are separate from each other allowing slight movement in the tank so frame twist wont crack the tanks. All of our tanks come with these mounts and we also sell them separate for people having a hard time getting there tank to stay in one piece. http://ironrhinodesign.com/store/catalog/p...products_id=131

New radiator grill. These are for people with solid front plastics mounting the radiator down low. There are two different sizes we offer grills for. drag radiator grill

we haven't had any problems with ours breaking. I have a couple friends running them on a 20mm stroke drag bike and a triple cylinder drag bike. Both ran all weekend at Banshee Wars in Dumont without problems. These bikes vibrate harder than anything out there so if they are going to break that was the test. A lot of other people are building theres from a bunch of separate pieces all welded together. Our tanks are made from far fewer pieces so there is less weld and fewer areas to break. They were bent on a CNC press brake with proper tooling as opposed to using a hand brake that tends to put too much stress on the material when it is formed. This being said I don't think our tanks will break. If they do I'll send you out a replacement.

volume is 1.5 gallons. They weigh 3 #'s

Sorry Majic we have been super busy lately. The best way to catch us is email. [email protected]. I would love to help you out with whatever you are looking for.

Also some new aluminum gas tanks! http://ironrhinodesign.com/store/catalog/p...;products_id=64

another style http://ironrhinodesign.com/store/catalog/p...;products_id=94

Here's some new radiator grills for people with solid front plastic drag Banshees http://ironrhinodesign.com/store/catalog/p...;products_id=95