rob8718

http://www2.towerhobbies.com/cgi-bin/wti00...LXEMG5&P=ML might be interested in this i use this one for checking the temp on my gas powered r/c they got other ones on that site to.....going to be takeing it with me when i go ridein

:yelrotflmao:

its my idle screw....my air screw is 1.5 turns out.....my carb slides was in backwards the bike idle really nice and revs nice not spiting oil out of the pipes anymore... wonder how long the guy was rideing it like that befor i got it :biggrin: got it for 1,950 cut the fenders to the resized pics make the cuts look messed up... just installing some stuff that needed to be replaced rear axel bearings,front bearings,tie rods,front & rear brakes,clutch cable

allright

i ride in milan,mi i think the elevation is around 665 ft. not sure tho

pro circuit pipes,boost bottle and a k&n with the lid on

today it was around 40 degrees outside it would like load up really fast at idle i half to have the idle screw turned all the way in for it to barley idle and it would stall after a min. of idleing... im goin to be rideing at 665 feet around 50 to 80 degrees is my jetting to rich for this or do you think its somthing else? the carbs have 270mains 30 pilots and the needle is in the 3rd clip..i dontkno how it performs yet havnt had a chance to take it out yet trottle responce seems slow and sluggish tho...thanks for reading my post