twojztt

well i put my motor together new pistons ported cylinders 34mm carbs vitos exhaust kn filter 19cc domes v force reeds,plus 5 degrees timing and i got 150 psi kicking presure.Dont i want more compression i will run race gas.bogs some from the get go but does not pop or bog top end just does not feel as fast as i expected. vitos sent me a .20 over base gasket so if i run smaller domes wont it bring my compression up?

i am running race fuel,but would like more compression,is there a need for 17cc domes or 18cc

would a .20 over stock base gasket lower compression in both cyl. slightly

stage 5 port work 34mm carbs intake manifolds 19 cc domes the base gasket is a .20 vitos gasket which would cause the slightly lower compression in both cylinders?

i do not now what pilots came pre jetted clip is on third groove with two more to go down.

03 banshee with stage 5 porting with 34 mm kiehn carbs,vforce reeds,19cc domes,pro desighn coolhead,wisesco pistons,vitos fat bastard pip degrees + 5 timing advance,k n filter 150 psi kicking pressure.Shouldnt the psi be higher the bike feels sluggish and bogs in 1 st 2nd.Top end does not bod or pop but does not feel much faster than unported should i get 18cc domes i am not scared of race fuel.Also it does not idle no matter how much you adjust the idle adjusters.