2003banshee21

Ok so just g out and ride her around and see if she cleans up a tad.. So easy and a fun way to possibly fix it.. It was cold the day I started it with the choke and if I didn't have it on she died quick.. All else fails I'll cleans carbs and check pipes! It's raining today sonidk if I'll get to it but I will asap! Thanks guys!

Hey guys, I havnt posted in a long time.. But I hope you'll still help me out.. Ok here is my situation.. I have a 2003 banshee and My axle bearings were shot in my carrier so I parked her in my garage and kinda just didn't bother with her because I was having surgery which wouldn't let Me ride so I le her sit for 3 months with near no gas in the tank.. But I finally fixed her the other day and I added fresh gas and changed out the plugs.. Took a while to get her to run but she started. I left her running for maybe 5min with the choke on then turned the choke off. She revd up fine but when I looked at the left exhaust she was spitting oil.. What would case this?

Hey guys, I havnt posted in a long time.. But I hope you'll still help me out.. Ok here is my situation.. I have a 2003 banshee and My axle bearings were shot in my carrier so I parked her in my garage and kinda just didn't bother with her because I was having surgery which wouldn't let Me ride so I le her sit for 3 months with near no gas in the tank.. But I finally fixed her the other day and I added fresh gas and changed out the plugs.. Took a while to get her to run but she started. I left her running for maybe 5min with the choke on then turned the choke off. She revd up fine but when I looked at the left exhaust she was spitting oil.. What would case this?

98Sheenut hey man i never really liked the fenders either but like some said it does look better then all the rest but i have a ? where did u get that graphic kit whats it called and give me all info on that please, i been trying to find that graphic kit for ever! thanks man!

i know and i was thinking it was other problems like electric and the carbs and stuff damn i hate them idk how they have room to stuff them in it! but agian thanks everyone! beware of rodents

I finally got it running right! The problem was the stupidest thing in the world! my engine wasn't getting enough air through the air box lid because fuckin squirrel put there nuts inside my airbox lid and packed them in so tight that when i took off my lid and shook it, it didn't rattle i looked at it today and realized it and took them out, and now it runs the full ponies! THANKS FOR THE HELP EVERYONE!

I got home and i changed the plugs in my banshee! started first kick w. choke on (its cold here) i let it run for a few mins and it sounded better it was reving out so i thought i hoped i fixed it. but when i shifted into first it did the same thing wanted to die out shifted to secoind was barly moving. the filters pretty clean! and the lines are fine. could it be the carb tors, sync or carbs just need cleaning? it did sit for a month before the problem started does it take a banshee a while for it to warm up in cold weather cause i could touch the piupes after a few min of being one? still poofin out some oil could the oil just settled at the bottom of the carbs?

Well im in school right now and i know the choke is in when i ride it and im gonna take cruise to a auto store to get some plugs or nacs and change my mix to 32:1. im gonna download the banshee service manual so i can take the carbs apart, so i know how to do this stuff and do it right! i wanna keep her alive and running great!

I will def do and check everything tom. im sry to be a pain in the ass this is my first banshee, i had a blaster before but got ride of that and now i have kfx and yfz but anyways, whats the best mix ratio for a stock shee? 20:1 25:1 32:1 i have a ratio rite and i been using maxima super m oil. Again the problem is that all the gears bog out i cant go to 3rd or neasrly 2nd with out it dieing out on me, full throttle sounds likes it just gonna bog itsself out, the plugs are dark and a little oily so im hopeing their fauled. but i live 5 miles from nacs racing so ill go there and pick up plugs! u guys are all def. help thanks a lot and ill lets ya know what happens!

HOw do i sync the carbs idk how i've never played w. those before, and how do i clean the lines just take aprt and air blow them and replace and just the lines going into the carbs? ill changed plugs tom. clean filter!

Hey guys this is my first time posting i've been looking at everyones quads and reading post but havn't been posting and eveyone has some awesome banshees out there. But now its time to start posting! I have a problem w. my 2003 banshee! Its a completly stock! i just picked her up in sept some time, it was used but the guy never rode it at all, he just bought it added aluminum parts and sold it, belived to have only 3hrs on it(showroom condityion no scrathes anywhere or wear). but anyways i been riding it and its been fine but then when i went out to my track oneday i wasn't able to clear all the jumps the same i was coming up short, i though maybe the oil mixture to high so i drained her and filled her back up w. new gas and cleaned the plugs. it did not help i will start her and she will idle but when i take off it does rev high at all u can hold it full throttle in fisrt and it moves like a turtle i can barley make it up hills. so today i cleaned and changed the mixture again and still the same what should i do any help or info!