ESNewman

Hey guys, Steven Newman here from ElectroSport Industries, just getting some information out about our products to see if there's any interest for them. Here's what we have to offer : High Output Stator - 250 watts AC. 1x 100W lead 1x 150W lead. Adds onto stock backing plate. Priced at $159 retail - Part number ESG870 - all years. NOT COMPATIBLE WITH "HIGH OUTPUT FLYWHEELS" Replacement CDI units - for early/late model banshees, better curve than stock, plug and play. Priced at $139 Retail. Part Numbers CD4305 (97-on) CD4306 (87-94) and CD4307 (95-96). Multi-Curve CDI units - plug and play, 8 different curves to choose from. Priced at $189 retail. Part numbers CD4306M (87-94) CD4305 (97-on) CD4307M (95-96). Acewell Speedometers - Multi-Function speedometers, mounts to triple clamps. Functions include Speed, RPM, 2 Tripometers, Clock, Average RPM, Average Speed, Permanently Backlit Speedo for night riders, large LCD display, Temperature (oil or water), Non-Resettable Odometer, Hour meter and is 100% water-proof. Priced at $169 retail. Part Number ACE-3200. Basically we're trying to see if there's any interest in the products, and if so, would be more than willing to set up special pricing for a group buy. The prices above are just retail prices, we could discuss group discounts later if it turns out there's an interest in it. Let me know what you guys think. Thanks!

No. It's 8 set curves, you basically switch between them to get the best performance out of your bike. So far we have had pretty good success with them, it's just a matter of figuring out which curve is best for the particular mods you have done to your bike. The temperatures shouldn't be a problem. The unit is completely sealed, 100% waterproof, I can't say 100% for sure, but then again i've never heard of anyone riding in temps like that! We could probably work something out for the stator.

Alan, We like to think so. It's larger, easier to read, and has all the same functions as far as I know. From what i've been told by other Vapor users, it's more useable than the TrailTech due to it's larger display. The hour meter and RPM meter are both compatible with the Banshee. The RPM meter works off the spark plug wire or taps into a CDI wire. The instructions we have as of right now are general, but we will have Banshee specific instructions soon. We have been slowly but surely getting all the popular and well selling quads into the shop and doing model specific instructions. As of this moment we have 2 different mounts, 1 is a single post mount (as pictured) and one is a dual post mount. The dual post is very universal, and has worked on all MX bikes as well as all the ATV's we have seen thus far. We should be getting a banshee in within the next few weeks to do some instructions on. Any other questions or concerns? I will be more than happy to answer them. I will check in periodically. Thanks!

Hey guys, Steven Newman here from ElectroSport Industries, just getting some information out about our products to see if there's any interest for them. Here's what we have to offer : High Output Stator - 250 watts AC. 1x 100W lead 1x 150W lead. Adds onto stock backing plate. Priced at $159 retail - Part number ESG870 - all years. NOT COMPATIBLE WITH "HIGH OUTPUT FLYWHEELS" Replacement CDI units - for early/late model banshees, better curve than stock, plug and play. Priced at $139 Retail. Part Numbers CD4305 (97-on) CD4306 (87-94) and CD4307 (95-96). Multi-Curve CDI units - plug and play, 8 different curves to choose from. Priced at $189 retail. Part numbers CD4306M (87-94) CD4305 (97-on) CD4307M (95-96). Acewell Speedometers - Multi-Function speedometers, mounts to triple clamps. Functions include Speed, RPM, 2 Tripometers, Clock, Average RPM, Average Speed, Permanently Backlit Speedo for night riders, large LCD display, Temperature (oil or water), Non-Resettable Odometer, Hour meter and is 100% water-proof. Priced at $169 retail. Part Number ACE-3200. Basically we're trying to see if there's any interest in the products, and if so, would be more than willing to set up special pricing for a group buy. The prices above are just retail prices, we could discuss group discounts later if it turns out there's an interest in it. Let me know what you guys think. Thanks!

Watkins, Hi, Steve from ElectroSport Industries here. We sell stators for banshees, and I have had this happen in the past with aftermarket flywheels. It's possible the bolts backed out and from there it destroyed it, or the flywheel can warp over time. Sometimes on aftermarket flywheels as well, the magnets can come loose (if it has that type of magnets). Make sure to use locktite on the bolts, but if it feels like it's rubbing, or makes a squealing noise while running, you have an issue, probably with the flywheel. The stator only needs roughly 1mm of clearance from the flywheel, but if it's dragging it will ruin it sooner or later. I would contact Ricky about it. -Steven Newman -Technical Support -ElectroSport Industries -Electrex USA LTD. -3803 Oceanic Dr. Unit 201 -Oceanside, CA 92056 -ORDERS : 1-888-369-8359 -TECH : 1-760-842-8300 -www.electrosport.com