ALTVATER

yeah they r numbered 15 and 16 i just wanted to make sure they didn't have to be alternated also. or if it mattered.

is there a certain order u r supposeed to install these clutch plates. i am leaving tomorrow so i would like to get it installed. i want to make sure i don't have to put them in a certain order. thanks

here's the deal i just rebuilt my shee and i was wonder what my deal is??? i think i probably just need bigger pilots but someone the other day told me some new motors wont idol until they r broke in good. also could it be main jets being to little? i am not very good at jetting and i am trying to figure out what is going on. i usually do all my riding at LS oklahoma. oh and do u guys think temp change will affect my motor enough i have to change mains. i have a 421 cheetah, 35 kein pwks, and shearers. my carbs have 152 mains and i haven't checked pilots.

here's the deal i just rebuilt my shee and i was wonder what my deal is??? i think i probably just need bigger pilots but someone the other day told me some new motors wont idol until they r broke in good. also could it be main jets being to little? i am not very good at jetting and i am trying to figure out what is going on. i usually do all my riding at LS oklahoma. oh and do u guys think temp change will affect my motor enough i have to change mains. i have a 421 cheetah, 35 kein pwks, and shearers.

i pm'd him and he didn't reply so anyone else?

i need some tires soon for my spring break trip. i would like them to be mounted on blue lables but it is not to important. i can get rims. pm me thanks.

i have a 35 mm carrier right now and i got it on my bike but the left side threads r f-ed. i would rather find a cheaper 35 mm than have to get a 40 mm but if anyone has either of these for sale please pm me witha price and i will get back to u. thanks

well what i did when my banshee wouldn't shut off i cut the battary wire. j/k lmao

yeah i have a 421 cheetah, shearers etc. so it should be over 160 psi i don't know i haven't started it yet but i know what i am going to do i talked to jeff today at FAST. oh and hell yeah i hear u on the fuel i wish i could run pump gas i was just told it is a must for my motor.

my bike is ready to get fired up but i was wondering what u guys were running with c-12. what ratio should i mix it i know it is supposed to be leaner and i couldn't find anything doing a search. also what u mix for a new motor and what some of ur prefrences r on break in time. any advice is appreciated thanks

just wondering what u guys think of maybe puttin a bigger rubber piece on the stock ones with longer bolts so u don't have to have them nylon spacers, or i was maybe thinking od making some of my own. i hate how them small bore pipes mount. i talked to shearer cause i have them and he said he is going to make a new jig so they wont hit. i know ur talking about cpi's but they both have the same problem.

so i just got one of these and i am not for sure how it actually goes together. i took the old one out of the pressure plate and i was wondering if anyone had any pics of how this new one mounts up. i think the bolt goes in the pressure plate and the u adjust it wuth the allenwrench screw through the middle. i am just making sure i am doing this wright before i put my plate on and lockup. i will post a pic of the old and new so u know what i am talking about. OLD: http://i108.photobucket.com/albums/n37/alt...ATVparts005.jpg NEW: http://i108.photobucket.com/albums/n37/alt...ATVparts004.jpg

i looked at mine and if i space them where ur are and with the spacers i have it will work. thanks for ur help it sucks that shearer doesn't have his pipe tabs fit better.

I don't know about that i might be able to cut it out. i will check and see if i move them if they hit. thanks

ok here is what i have done and it still is hitting. http://i108.photobucket.com/albums/n37/alt...ATVparts001.jpg http://i108.photobucket.com/albums/n37/alt...ATVparts002.jpg http://i108.photobucket.com/albums/n37/alt...ATVparts003.jpg

here are some pics to better explain what i am talking about. http://i108.photobucket.com/albums/n37/alt...ATVparts003.jpg http://i108.photobucket.com/albums/n37/alt...ATVparts002.jpg http://i108.photobucket.com/albums/n37/alt...ATVparts001.jpg

i have almost an inch of spacers between the hanger and the frame. thats what i am saying i put spacers in there and it is still solid on the cylinder.!?!?!?

I already posted on of this a while back and got some good feedback about putting spacers on my pipe hangers but my left side pipe is still hitting the cylinder. my right side fits awesome but for some reason the left side is being a bitch. i know someone said something about using a rubber hammer to bend them but i wanted to get some feedback before i start beating on my $525 pipes. if anyone has any solutions to fix this or why it would be like this please WB. i don't want to have to send them back i should have my bike together tonight and i want to start it.

I already posted on of this a while back and got some good feedback about putting spacers on my pipe hangers but my left side pipe is still hitting the cylinder. my right side fits awesome but for some reason the left side is being a bitch. i know someone said something about using a rubber hammer to bend them but i wanted to get some feedback before i start beating on my $525 pipes. if anyone has any solutions to fix this or why it would be like this please WB. i don't want to have to send them back i should have my bike together tonight and i want to start it.

sorry guys i just got some from a guy for 20 thanks though

Yeah i am getting them from u

i am a shee i am rebuilding and i need some foot pegs. i just got ride of my nerfs and i have no idea where my pegs r. i know this is the wrong place to post this but i thought maybe someone would look here if they have them and pm me. thanks

i am rebuilding my shee and i am making it a drag/duner. i just sold my nerfbars and i have no idea where my old footpegs r. i am looking for either stock or aftermarket pegs but i don't want to spend to much. if anyone has some laying around pm me or post something thanks.

yeah that is what i figured i just talked him the other day. i was just wondering if someone supplied them. thanks

yeah i just started doing buissness with jeff and i would have to agree with everything u guys have said. like tonight he called me afterwork on his own time. i call that customer service. i mean damn the man takes his work home with him and he had the time to talk to me about my mods and needs for my bike. his prices r good and he knows what he is talking about. he always sells me on more stuff than i was expecting but everything has been well worth it. i am already referring him to others and will only do buissness with him in the future. :thumbsup: