osoloe1

Sold

I have a Banshee lower end out of a 98 the crank is good and the trans id good just need the space in my garage. I am asking 250 plus shipping just want it gone. PM me or email me at osoloe1@aol.com. I can send more pics if you want Thanks

I got great news yesterday got out of the MRI machine another herniated disk. So here is my 01 shee that I was building for myself. I have the title and key for it. The tires are new and it has the 2 into 1 trinity stage 4 carb kit on it. A set of FMF exhaust. The guy I got it from said it was 30 over and needed outer crank seals, it will act like it wants to start up then dies. I was going to build it up so I was going to take it apart anyway. The only other thing it needs besides that is a new bolt kit for the plastic. I want 1200 for it thats what I paid for it. I can send more pics if you just send me you email. I am right by Springfield IL Thanks

Everyone that asked a question has been PM Thanks

I took the cylinders into the shop yesterday and he said they need cleaned up so now the cylinders are readt to be out on an ran but when he cleaned them up they are 40 over and the pistions I have a junk. I am asking 220 shipped. Thanks

I am taking offers on these because I really don't know what these GBC Sand Shark rims and tires are worth. So make any offer. Thanks

Here is a pic of the cylinders and head if I can get it to post.

Stock suspension only and I have the spindles with everything or just the spindles. Can send pics if you would like Thanks

No V force, I do have the stator cover I have 1 headlight that is not broke and one that is, I have a grab bar no tail light, no front bumper plastic but the front has been race cut, front brake lever but the ball on the end is broke. I have the hubs, and I do have a wiring harness but it is on e-bay right now but I can pull it. Can get you pics if you want. Thanks

I am parting out a complete 98 banshee I have almost everything for it. It was used in the sand so most of the bushings and bearings are trashed. The motor has the jugs off of it and the lower end is in great condition. The jugs are 30 over with stock porting. It had stock pipes on it when I bought it so this one is still pretty much stock. Let me know what you are looking for and we can work out a deal. I have the frame also but I have not recieved the title for it yet waiting on the guy to get it from his bank. The VIN is still on the frame and I ran it. You can also e-mail me at osoloe1@aol.com. Thanks John

1987 Honda Fourtrax TRX250R FTZ built with title. FTZ airbox eliminator, FTZ hi-flow filter with outerwear, 40.5mm FTZ carb (38mm Mikuni bored by FTZ), FTZ Hi-Velocity reed cage, Motoplat CR250 ignition, FTZ long-rod 270cc spacer-plate motor, FTZ dune/drag ported cylinder, FTZ head, Paul Turner

Well I sold it for 1650 yesterday so I guess I wasn't to far off Thanks

OK what do you guys think it is worth?

I am selling my 95 Banshee it is in great shape and has great compression. It is pretty much stock except it has been bored 40 over and it has a set of FMF pipes and silencers (the pipes have been painted black with high heat paint). The only other thing it has is a boost bottle. The front tires have about 95% tread and the rear have about 50% tread I just put the fronts on a couple of months ago. If you have any question feel free to e-mail me at osoloe1@aol.com Thanks

I need a set of stock black plastic heel gaurds Thanks

It has been sold

Thanks to everyone, but I am keeping an open mind hopefully it will get better and I can get back on one.

Thanks I really hate to sell it but on the other hand I hate to see it sit. I had one back surgery in Sept of last year and felt great after, but then I had another disk crack and a 2 inch piece crushed my nerve for my right leg and I still have not got the feeling back so I am going to sit out for a while and see what happens I have all bikes and quads for sell. It sucks but I have to do it for now.

I will take a set of eye patches if you have any.

I am selling my 1987 Honda 250R. It has the factory Honda Plastic that is in good condition except it has one small crack that is not all the way through yet on the right side front fender. Also has the original seat that is mint condition and the original toolkit and holder. It has only been bored once to 20 over and it still has great compression. I also have the original title from 1987 that says new. It has a DG pipe and silencer that is chrome also chrome shifter, A-arms, kicker, and brake petal. The headlight works but the kill switch doesn't work, but I think I have a switch that does work. The tires have 95% tread on them the front right has a plug but it still holds air. Some extras Moose case saver, renthal bars, PMR front and rear grab bars and Douglas chrome rims. The rear axle carrier was rebuilt not to long ago. The air box still has the lid and it has a K&N filter with dirt sock on it. I am probably forgetting some stuff. I am asking 2200 OBO. You can contact me at osoloe1@aol.com or call me at 217-414-8112. If you want to see more pics contact me and I will send them. Thanks

Sold you can delete this forum. Thanks

No I can't go that low I will take 1800 and that is my bottom dollar.

I am selling my 2000 Banshee it just had the top end rebuilt and it is now bored 40 over with Weisco Pistions. It has a full FMF Fatty System on it. The plastic is in great condition it has some holes from where the warning plates were mounted but no cracks just some scratches from ridding. I am asking $1900.00 for it no trades please. You can contact me at osoloe1@aol.com

OK, I should have went and looked at the jets myself instead of having my dad look at them for me. He took the jets out of the stock old carbs I have sitting in a box by the shee. Here is what it has in it 30 pilots and 325 mains. :biggrin: But the Best News is that it is running great once I figured out I had the carb bowls on the wrong carbs :: . I just want to Thanks everyone on this site for there help.