sexypizzaguy

im having some problems jetting my banshee. what i have is a 4mil stroker t5's cool head delta force reeds 30mm oko carbs & k&n's. it has 170 lbs of compression. i run 110 race gas and redline oil mixed at 40:1.the port job was done by me using race logic template kit. i also flowed the cylenders on my friends superflow flow bench but i did this so long ago i cant rember the numbers. i also use a exhaust gas temp guage made by racepak to aid in jetting. im fairly shure i have my main jet right. i currently have a 165 main. my egt at wot is 1250 degrees f. my problem is its kinda boggie down low and it seems to have a lean kackle at about 1/2 throttle but only under load. i currently have a 55 piolet and a n68a neddle with the clip in the 3rd position from top. no matter what i seem to do i cant seem to work it out. anybody else with my combination that could help? o yeah im at sea level. thanks seth