dethinc

Sry .Wrong topic had to many windows open my bad. lol

No Offers? If i do not sell this machine its going into storage for the next 20 yrs I need to finish my rail and i am unable to ride anymore due to knee op. Knee went bad.

Where you located? Ty

Only rust is on axle the bike has almost all stainless steel bolts and nuts no rust on frame anywhere.

Any offers?

Feel free to stop by for a test ride.

Selling my machine, building a rail. I live in central ny near syracuse. This machine runs perfect no hidden flaws or defects, Never fouled a plug or left me stranded anywhere ever. Feel secure in buying this machine. $3800.00 2001 banshee I bought new Itp tires all around spare set of kenda claw on rims. new front plastic with a set of used rear. new bushings for a arms and wheel bearings all around. Last spring frame was powder coated gloss black, with rear swing, foot pegs .etc... motion pro tors kit. most covers are polished. dual fuel inlet for carbs. Engine this year -bored .040 installed wiseco pro lite pistons slight porting cleaning casting up. -Cylinders polished and installed new coolhead with 18cc chambers. -all new seals and bearings. -new barnett dirt digger clutch kit -new toomey t6 pipes and silencers -new sprockets with chain dropped front and raised back up one tooth, stock size chain. -new baja front bumper. -new boyseen reeds -pro flow air filter This was all done in may of this year maybe 40hrs on it now. Runs very smooth no hesitation anywhere. This machine has been totally rebuilt every year, this year is the first year it had to be bored. Took our time to get this tuned perfect very snappy will rip right along. this machine has paper work for reg/dmv any questions email me at [email protected]

If you read it will say. Machine has paperwork i also have 2 more blasters a 1999 with no front now and a 1997

blaster is also listed on ebay http://cgi.ebay.com/ebaymotors/yamaha-blas...015192729QQrdZ1

Forgot to mention that the banshee comes with a complete stainles steel fasenter kit, what pieces i have not put on yet. This machine just had over 2k invested into it 3 months ago New full toomey pipes t-6 new cool head 18cc domes 90 octane minimum new wiseco pro lites .040 radiator chrome powder coat cylinders polished and bored new sprockets and chain and much more This machine the whole 5 years i have had it has gone through 5 sets of plugs, a new set installed every spring. never fouled. oil has always been mixed at 4.5 oz per gal using amsoil. I have seen many people buy and trade their machine to only get home and find half the threads and such on their machines are cobbed together and such. This machine has been totally rebuilt by me every year. This machine is a guaranteed runner you will not be disapointed when this machine is purchased. I just do not wish to see it get parted out.. ty

$1500.00 for the blaster. $4000.00 for the banshee. First ones to hand me money gets these machines. After this weekend i will be parting out these machines on ebay..

More pictures of the blaster. jy4ag02325c031469 Is the serial on frame and registration.

Yes it is a 05 but it has a 99 front end. the person we got the machine off of just let everything go and just rode it into the ground. i had a 99 roller that was all good in the front along with front plastic and stuff so i used the 99 front end parts. I like the headlight on the older style better. The rest of the machine is a 2005 except the motor wich is a 2006, motor is completly new and runs flawlessly, tons of compression you would have to kick it to see. I could easily part the motor out for most of what im asking for the whole machine. All the paper work is for 2005 yfs200 blaster. Numbers are on the frame.

Sorry bout a delay in photos i have a funeral tues thru wed to attend to..

Monday morning i will post more pictures of the blaster here. as far as a price on blaster 1500.00 is about what i have into it.

better pics of wich machine and specify in detail.

Sry bout that. Thought it got drafted with the rest. Central new york

I am selling these two machines or taking a trade on one of these for a dune buggy/sand rail if it is road legal. 2001 banshee I bought new Itp tires all around spare set of kenda claw on rims. new front plastic with a set of used rear. new bushings for a arms and wheel bearings all around. Last spring frame was powder coated gloss black, with rear swing, foot pegs .etc... motion pro tors kit. most covers are polished. dual fuel inlet for carbs. Engine this year -bored .040 installed wiseco pro lite pistons slight porting cleaning casting up. -Cylinders polished and installed new coolhead with 18cc chambers. -all new seals and bearings. -new barnett dirt digger clutch kit -new toomey t6 pipes and silencers -new sprockets with chain dropped front and raised back up one tooth, stock size chain. -new baja front bumper. -new boyseen reeds -pro flow air filter This was all done in may of this year maybe 40hrs on it now. Runs very smooth no hesitation anywhere. This machine has been totally rebuilt every year this year is the first year it had to be bored. Took our time to get this tuned perfect very snappy will rip right along. ----------------------------------------------------------------------------------------------------------------------------- 2005 blaster Was a machine i picked up from someone who did not take care of it at all. This is what has been done. New crank and bearing brand new with a new cylinder bored .040 over with a wsm piston, along with all new seals. New shift cam, was not shifting smooth. New oil injector block off New chain and sprockets New bearings in all wheels New a arm bushings New swing arm bearings New axle bearings New boyseen reeds Rejetted carb Motor has been completely redone now. A arms, front, plastic, headlight,brakes. all donated from a 1995 roller we had Machine runs great. only thing it needs is a new rear fender, has a crack under seat. Both of these machines have paper work for reg/dmv any questions email me at [email protected]

I am selling these two machines or taking a trade on one of these for a dune buggy/sand rail if it is road legal. 2001 banshee I bought new Itp tires all around spare set of kenda claw on rims. new front plastic with a set of used rear. new bushings for a arms and wheel bearings all around. Last spring frame was powder coated gloss black, with rear swing, foot pegs .etc... motion pro tors kit. most covers are polished. dual fuel inlet for carbs. Engine this year -bored .040 installed wiseco pro lite pistons slight porting cleaning casting up. -Cylinders polished and installed new coolhead with 18cc chambers. -all new seals and bearings. -new barnett dirt digger clutch kit -new toomey t6 pipes and silencers -new sprockets with chain dropped front and raised back up one tooth, stock size chain. -new baja front bumper. -new boyseen reeds -pro flow air filter This was all done in may of this year maybe 40hrs on it now. Runs very smooth no hesitation anywhere. This machine has been totally rebuilt every year this year is the first year it had to be bored. Took our time to get this tuned perfect very snappy will rip right along. ----------------------------------------------------------------------------------------------------------------------------- 2005 blaster Was a machine i picked up from someone who did not take care of it at all. This is what has been done. New crank and bearing brand new with a new cylinder bored .040 over with a wsm piston, along with all new seals. New shift cam, was not shifting smooth. New oil injector block off New chain and sprockets New bearings in all wheels New a arm bushings New swing arm bearings New axle bearings New boyseen reeds Rejetted carb Motor has been completely redone now. A arms, front, plastic, headlight,brakes. all donated from a 1995 roller we had Machine runs great. only thing it needs is a new rear fender, has a crack under seat. Both of these machines have paper work for reg/dmv any questions email me at [email protected]

posting to this reply it caught my eye The banshee that nutcase traded his ds to BansheeCJ3 is a pretty bad basket case. his machine will reside in my shop for a bit. The fact that mike is making is this person was very dishonest in this dealings. most of what is wrong not all he knew was bad, just by what is wrong it could not be overlooked. axle is shot axle carrier is bad bearings are not new as stated. $150.00 stator is shot,has no light output 0 volts. $70.00 frame was spray painted.new powder coat and stripped. $300.00 half the bolts are wrong type or are stripped. ? wiring is a clustered mess ends all chopped off if not totally bad havent gotten that far. ? engine case is damaged badly,section by chain commonly missing piece.most threads are stripped out.fix or repair? crank bearing are sloppy. all bearings ordered $60.00 Trans i havent checked yet. carbs are not the great. wait till the end to see.? piston kit yes and no pistons are old but it is apart might as well. reeds, has old stock ones in. slight porting,clean the nasty casting up a bit, no reason here i want to.lol.....free machine needs a complete bolt and nut kit from plastics to axles and spindles. weilded frame for foot pegs cracked area and replaced stripped threaded pieces and placed stock thread type in. $25.00 I will be rebuilding this machine for him as a friend if he were to go to another shop it would go well over $1500. I'm not here to diss anyone i just wanted the facts placed on the table,this machine is a basket case. Most the parts are under priced as a dealer.He wants reliable parts not used take a chance maybe its good and work for awhile parts.The prices are fair and accurate. As far as the ds it had scratches and bumps but no damage that would hinder its function. Was rode on a daily basis. All the parts and work are not going to be fancy,just enough to get it to be a reliable machine again.Except some of the motor work im doing for free. some things i didnt list but i think the point is made. I'm sure this is the last time nutcase will trade with anyone and his trust is pretty much gone now. I suggested he seek legal advice"as even in trades"to see where he stands but in the end will be up to him,He will have the the reciepts and pictures. I know if i sold a machine out of my shop like this a someone fell for it, I would not be in businees for long and would asume i would gain a bad rep, and my business would fail. But i will leave that up to all of you to decide. Play hard......