[Raptor]

1. no pics, no price? how is anyone going to buy it?
   

[2x75wbulbs ok with stock wiring?]

I ended up swapping my bulbs for 50w. Thanks for all the extra debating guys. Im currently running an R6 tailight.

[Glamis Thanksgiving Weekend 26,27,28th]

Ill be at Gordons fri morn!!!

 

Ill be heading out on friday morning. My friend is leaving wed night and will be getting us a spot near vendor's row. 3 banshees with me.

[2x75wbulbs ok with stock wiring?]

The igniton and cdi gets electricity from a different wiring circuit. Your stator has 2 circuits. The igniton stator coils (square white plug). The lighting circuit is the yellow and back wires with the bullit conectors. That is why your banshee will run with out them pluged in.

 

So, how many watts is the lighting ckt? I'm still going to resize my bulbs, but I would like to know.

[2x75wbulbs ok with stock wiring?]

might want to beef up the frame to stator/engine ground.....and 200w is max rated...you usually don't ever see that much output. that 150 watts is pretty much as much as you can run ok on it

 

 

That's a very good point. 80% of max rated is a pretty good rule for electrical. No didn't remember I'm an electrical engineer. I'm going to downsize the bulbs to be safe.

[2x75wbulbs ok with stock wiring?]

i turn my light on at a low idle when its at 12 volts they blow out on a high idle hope this helps never blown a bulb yet

 

 

My stator came with a voltage regulator to prevent that. I think the ignition runs under 15W.

[2x75wbulbs ok with stock wiring?]

I just bought some new laser star lights for my bike and they have 75w bulbs in them. I want to know if anyone has put something like this on their bike. It seemed high to me but I know my stator can handle it. Do I have to change the wiring or switch?

[Looking for accelerator]

i want to swap out the accelerator on my banshee for a regular thumb throttle. i have a pro-motion twist.

david 626-672-530seven

[Need new lights]

I recently swapped out my stator for a 200w and my lights still look like crap. I need a replacement set or even some clean lenses. (626)672-530seven. David. Edit: I also need a new stator cover.

[exhaust leak]

I was cleanin the shee the other day and noticed residue built up under my left exhaust port...it looked like pencil lead and

syrup..( I run 100 L).been building up.. i belive I need a new Gasket for the left exhaust.. I can apply pressure and see it's not as tite as could be.

(FmF fattys..).. is this a simple fix as ordering a new gasket and new springs???

 

 

Yes, thats all u need to fix that.

[Pancake bearing mod]

I will try that tonight, its insurance i should have bought when i first bought my bike. My rod and ball have already been welded together once. Sounds simple, i just didnt want to mess anything up.

 

thanks

[clutch help needed]

Thanks guys, i went to a local atv store and paid $8 for one.

[Pancake bearing mod]

i got the information to install when i purchased the mod last year, but i lost it all and i dont remember. Can anyone help?

[clutch help needed]

I took apart my bikes clutch today and the nut holding in the basket came off. The problem was that the ears off of the locking washer broke off and the nut just came loose. Im trying to figure out what that washer is called and where to buy it. If anyone could help me i would really appreciate it, thanks.

[4TH of July at El Mirage]

Enough said, i was holding it down!!! LONG LIVE BANSHEES!!!!!!!

[new stator with wrong plug]

Looks like it was so easy, no one wanted to answer it.

[bansshee leaking oil not rev right]

You know what i meant.

[bansshee leaking oil not rev right]

my grammer bad two i like banchees and i like bykes and my bike dunt smoke because im not a DUMB ASS!

[banshee wont shift into fourth under hard power]

I had the same prob a while back. My clutch rod was worn and the clutch was not being fully released when i was trying to shift. appearently it was happening all the time, but i noticed when i was racing only. Good luck.

[Wheel spacers]

i tried them and personally did not like them. The handling on rough trails was weird. I went with offset wheels in the front and the bike rolls and steers smoother......way smoother.

[sealing my head]

I wouldn't recommend trying to reuse them. Save yourself the agrivation of pinching loose orings and possible leaks. just buy a new set.

[Chain rollers and extended swinger?]

www.ebay.com search banshee chain rollers. Get a set and adjust your chain.

[new stator with wrong plug]

i know i could cut and splice, but the question was.....will it work??? no problems with the cdi?

 

 

 

BUMP BUMP BUMP

 

[new stator with wrong plug]

i know i could cut and splice, but the question was.....will it work??? no problems with the cdi?

[new stator with wrong plug]

i ordered new stator and i got the one with the wrong plug on it. All the wires match in color. Can i just splice the wires together? I searched and found post that old stators wont work with new cdi's and i read that all stators work with all cdi's. What do i do? My bike is an 00 and the stator has a round plug on it.