-
Posts
311 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Hulio-mv
-
-
I like supreme pizza, vanilla malts, pecan pie, and fast rides on the beach and a banshee that runs 120 in the 1/8 mile oh shit I am in the wrong forum sorry :biggrin: :biggrin:
-
flames
-
Sorry I have clampon pods are you looking for clearance or what?
-
I used a sharpie you can get the marks off later with a solvent of some kind. I uses a heat gun and a carpet knife the heat makes the plastic much eaiser to cut
-
51.55 hp and 31.3 torque with mods in my sig 60 mm stock bore and no real intake port work just casting flaws removed and the transfers smoothed I did take some material out of the exhaust side and polish it. I have played around with a few set of cylinders and a couple of books and cds on 2 stroke port work. no I am not a pro but it is good to know you did it yourself
-
I used a heat gun to soften it up a little and then used a carpet knife
-
pm sent
-
did you trade it or what?
-
http://www.goldenwestcycle.com/productinfo..._676-dc_587.htm
I have been using these for chadwick and other rocky conditions with 5 or 6 psi
also on the raptor at the dunes a buddy broke his bike and rode the raptor with them on it I am not saying they are paddles but they worked ok
-
where are you located?
-
So are you still looking to trade this car or not did your repair make the car run
-
did you trade?
-
I think I am going that weekend. Should be a 700 and 660 raptor my banshee and a kx 250
-
Its possible you broke the pivot bolt for the shift fork. That will make you think you are shifting but you arent actually changing gears. so what ever gear you were in when you were in when you turned around thats the gear it is still in.
-
just wondering if there were any events or open riding areas. all the tracks that I know of are closed to quads.
-
I shipped mine in a old cooler I had laying around with blankets and pillows around it. When I got it back the company sent it back in my cooler with foam cut out to fit the motor and on my papers they wrote me a little note saying that the cooler was a good idea for shipping.
-
KBC helmet smith goggles and torque octane gear a-star vector boots thor chest protector thor elbow and knee gaurds
-
I found a sticker that says My drinking team has a racing problem that fits the one behind the seat perfect and the top part that says warning is still visable.
-
Havent had any myself. Had a set of wicked on my last shee good product imo and 50dollars more than than ffr.
-
I havethe vapor and installed it with nothing extra been on there over a year and no problems at all I would also get the billet barclamp mount the plastic mount that comes with it is no good imo
-
So by the end of the season I hope to get a new rad cover and grill, I was a picture a guy had of his shee and he had a polished grill and in the little side holes on the tank shroud he had the same pattern on some polished metal. do any of you know where I could get a set up like that? and what mods would need to be done.
He is asking about savage 420, or maybe climbanyhill cant remember he had stockers and he had the side vents and the lower vents in the hood done in mesh. looked darn good too. imo
-
-
two empty J D bottles and some heater hose. and you are set I taped mine to each side of the tank this is where they perform best. If you want me to make you some just send me two bottles of whiskey and I will empty and dry the bottles for you and send back the finneshed product an no charge. :biggrin:
-
holeshots and itps sold? if not i would like to see pics and what other tires and wheels do you have?
Rear Rear Fenders Cut Or Uncut
in Wanted
Posted
I have some stockers that were painted when I got them they are white and painted a maroonish color I have started to take the paint off but it still neds alot more work