98flyguy

also to be noted...17cc domes not 18cc as previously stated thanks

pics

guess i also lied....they are kenda klaws. sorry if it dissapoints. they are like new...just a lil dusty from sittin.

i know its a little later than i said. but here they are. sorry again for the delay

still got it

i will get pics tonight, thanks

i bought these 8 mo ago and just need to get rid of them. i will not be using them on my project bike. they are pretty much brand new....only used to roll my old bike around when not at the dunes. my loss is your gain. Polished ITP C-Series wheels with maxim razors. $350 plus shipping

ill get a pic up after i get off work tonight

i have a set of turbo swirl 18cc domes. id like to get $80 for them. they are new in package never used. sold the bike so i dont need them anymore. thanks for looking

1900 plus shipping i paid 900 for the block, 350 for carbs, 300 polish work, 75 powdercoat, 200 NMotion to assemble and check everything out, 279 for vforce 3 reeds, 150 trinity head, 250 for piston kit, 100 for intake setup. so i have $2604 in the engine plus some other stuff i may have left out. anyhow i just need the cash for my 450. thanks shaun

on the chopping block is my treasured engine. i just ran out of money and time, so im parting all the stuff out. it was built by NMotion. it is all trinity parts. trued and welded 4mill crank. wiseco superlite pistons port work....should be around 65-75hp on pump gas. it has a trinity head, copper gasket, trinity intakes, pwk 35mm carbs, polsihed everything(cases, covers, head, and intakes) and powdercoated cylinders. cases are unbroken. the engine is off of an 01 banshee. banshee 6 banshee 5 banshee 4 banshee 2 banshee 1 sorry the engine is dusty, but i cant just wipe it off and i didnt have time to clean it properly for pics. anyhow i forgot to mention that the cases are portmatched. i have all sorts of stuff to sell chrome and polished parts as well as the engine... if i can sell the engine ill sell the rest of it. i hope those links work cuz i couldnt get the pics to load please make offer thanks for looking shaun

im located in wichita, ks no title on the frame...but i bought it from a friend of mine that is a cop. he ran the numbers on the frame and it is clean. 1900 on the engine....the pics do no justice for quality of work 350 on the frame 350 on axle...it includes entire rear end except for the brake caliper and swingarm 200 on the steering stem and tie rods...all chrome 150 for ignition system including coil 150 for show polished rear hubs 150 for like new rear shock 150 for like new front shocks (stock) 150 for entire set of plastics...2001 to match frame 175 entire front brake system 125 rear brake system 75 for the fat bars 175 for the front spindles and hubs 75 for the matching rear hubs...all painted in color shifting paint. 50 for fuel tank 450 for polished ITP c-series wheels with maxxis razor tires...new not used and here's the deal i want all the stuff spoken for before i ship any of it...i dont want to be stuck with anything. if i cant sell this stuff im just going to finish assembly and sell the bike whole for about 5k. thanks again for looking 1800 alienware laptop....ask for details...paid 2700 for it one year ago. like new 17" bad ass laptop.

I have to let my baby go. the engine is fresh from n-motion. never even started. all trinity parts. mild port work. case matched ports. welded 4mm crank. it will come with a trinity cool head with the copper gasket...not o-ring. 20cc domes. 17 cc turbo swirl domes are available. polished cases. polished case cover. candy blue powder coated cylinders polished head and trinity 35mm intake. also included are the 35mm keihn carbs with throttle cable. this is a show ready engine. the polishing alone cost me a fortune. this project is for sale for 2 reasons. one is my home remodel that cost me 4k over budget and the other is because of a jackass on here that screwed me out of 1300 dollars. anyhow the engine is flawless and never cracked or welded. I DONT KNOW WHAT THIS IS WORTH SO PLEASE JUST MAKE ME AN OFFER. if this sells i have a 2001 frame in mint cond, durablue adjustable axle chrome excellent, chrome steering stem, harness and electrical, fat bars, u name it i got it for sale. i have almost everything to complete the project except the seat and the swingarm. i even have a lonestar carrier. thanks for looking here is a link to 2 photo's with my camera phone. i can email better pics upon request. http://pg.photos.yahoo.com/ph/modularracin...m?.dir=/f192re2

my luck strikes again....on my way to pick up my girlfriends new bike...a girl hits my truck at a stoplight. i only made it 6 blocks from work! wtf.... to top it off she has no ins, no license....pointless calling the cops. no i gotta sue her ass. this world sux ass to top all that off i had 3 bikes to look at in oklahoma and only one person would return my calls so i guess i bought that bike....damn the luck.

it happened a little over a year ago. it was a bad time for me. and i didnt have alot of time to deal with it. in nov of o4 i had my z400 stolen. i had about 6 grand in it. now im tryin to check back in on them. thanks for your help shaun

heres everything i have on him. cell phone.... disconnected Brandon Knox 367 w elza Hazel Park, MI 48030 i have called the local police and they pretty much laughed at me. i called the hazel park police and they told me it was not mail fraud and i had to pursue a civil suit. the hazel park police would not even stop buy his house to see if that was his real address. i did some research online and found out that the address he gave me was his mothers. i believe he lives with his mother. the post office said they could do nothing even though he signed the certified letter reciept. i couldnt stop payment as it had already been cashed. i was supposed to be recieving a full rz 350 engine with all electronics and headlight wiring made up. it was to include reeds, carbs the whole nine yards. i paid him 1350 of my hard earned cash. when it happened there was a jeff penrod that offered to go buy his house and he never found anything out for me. i guess its a rough neighborhood in detroit. all i know is that i will prolly never recieve my goods or my money back, so if he just died and i knew that happened id be happy. anyhow im out of ideas and wasting more money on a lawyer chasing a loser wont get me anywhere. brandon needs a good ole fashion ass whooping. thanks shaun

would you be interested in a trade? i have a 1978 custom drag pinto. 460 all the goodies!

lost 1350 to this fool. he says minkia is his buddy. i dont know, but i have signed returned certified mail that bogart recieved this money and i got shafted. i hope Brandon Knox burns in hell and dies a slow and painful death. this is no joke ill pay 500 to anyone who can recover my money. thanks shaun sorry, i meant for this to go into the good guy forum. id move it but i dont know how to.

the user was bogart. i did say something...and little was done....like banning him. minkia lives in his area and has dealt with the guy b4 and was going to loook into it as i was goin to pay him to do so, but it fell through. another user went by his house, but the guy wasnt there. Brandon Knox was the guys real name. he lives in the detroit area, hazel park. id still like to have the engine or his entire rz banshee for the troubles. he needs to be hung in my opinion. the police there couldnt help cuz its an out of state matter. and the police here wont help for the same reason. now i gotta try and sue him.....prolly a waste of time and money. he's just a fricken looser. anyhow, what i found out tonight about this new engine is that there has been some clearancing on the cases for the long rod. also i see some fair porting on the transfer ports.but when cleaning things up i found carb cleaner puddled in the coolant holes? i swear it was carb cleaner in the coolant holes in the cases. also the crank is blued on one the good side that shows no pitting. the trinity head does have a copper gasket in which made no sense to me, with the cool head being o-ring and all. i did find a small piece of metal...the size of a puppy's toenail...inside of the cases on the piston with no pitting, same side i found the crank blued. hrm. guess i cant win. going to take the engine to kipp at dune trash racing and see what he says.

i jsut bought a trinity 420 stroker motor from a guy in deleware. i recieved the engine and have torn the head off of it. the right cylinder has pitting real bad on the piston and the dome. what could have caused this. secondly he said it only had 15 hrs on the engine, but if that was the case wouldnt i be able to see the honing marks still. i also found coolant in both cylinders...wich could have came from shippping as i do not believe the engine was completely drained because the bubble wrap was soaked and the engine was really wet. im wanting to know what to look for tomarrow night as far as markings on the rod and piston to make sure i got a trinity stroker.the compression seems to be really high, but i can see some wear on the lower cylinder walls. so basically i need to know what all is involved with a 420 kit from trinity? part numbers and any info you guys can get me. this engine is to replace the one i purchased on bansheehq 8 months ago and never recieved...lost 1200 on that one. anyhow i dont want to run this engine till its in tip top shape cuz i cant afford to lose more money. i paid 1385 for the engine with the 420 kit, trinity head (20 cc domes), 35mm pwk flat slide setup with intakes from trinity, including the throttl cable and twist throttle. he threw in the factory reed cages with boysen reeds. thanks agian guys

pm sent

im buying. the guy want 1k for the complete bike minus pipes. id part the bke and rebuild the engine, if its worth it. i have another banshee to finish and sell.

still got the engine? how much for it complete with carbs? shipped to 67217. email pics to [email protected] if you have them thanks shaun

whats this 89 banshee worth. in low condition complete minus pipes and a bad bearing on the crank. i have new crank located for 100. whats it worth in pieces. mostly stock. thanks

check this out. he might trade.... here is a link to the pics. engine is all new. it is a sweet ride. all the details are in the for sale section under american banshee. http://pg.photos.yahoo.com/ph/modularracin...lbum?.dir=/c748 thanks shaun