bigb3521

just checked the plugs it was running lean was wondering how high i should go on the main to start of with. (forgot to say i was a sea level and using the stock needles)

Just switched from T6's to t5's, starting the jetting at 27.5 pilot, 310 main and needle on fourth clip. it is still sluggish in mid to high range. (my mods are boyseen pro series reeds and dual K&N's) was wondering where to start on the jetting because boyseen says i should drop one to two sizes on the main but that sound stupid if your sucking more air. will appriciate any help

it is running lean i just got done working on it. i am at a 30 pilot, needle on the 3rd clip and 320 mains. its finally starting to get close to running. i also have the toomey needles. i have heard that they suck. i dont know if changing them would help me or not.

2003 shee with T-6's, boyseen pro series and dual K&N filter. running at sea level. Just installed new wisco power pistions. can not get the damn thing jetted. Running 280 mains, 27.5 pilots and needle at clip four. Iv tried dropping one to two sizes on the main like boyseen said but no luck. tried going up one to two sizes and still no luck.

i have a 2003 banshee with toomey T6 pipes. i am installing some boyseen pro series reeds and i know i am going to have to rejet.i have 280's in it right now. i have no idea what to jet to. can anyone help.