Jump to content

corn fused

Members
  • Posts

    3
  • Joined

  • Last visited

Previous Fields

  • My Banshee (optional)
    89 shee <br>fmf fattie pipes<br>pro design coolhead 18cc domes<br>reed spacers<br>minor port work(clean up rough cast from man and polish)<br>k&n filter<br>no air box

corn fused's Achievements

HQ Noob

HQ Noob (1/5)

0

Reputation

  1. not sure whats going on pulling out my hair bike ran fine going to the dunes wanted more power little low on comp, so i put new piston and rings in and went from 21cc to 18cc domes went from 130lbs comp to 188 comp running vp u2 110 octane fuel and amsoil series 2000 at 50:1 i have 300 main jets and im not sure what pilot jet with 1|2 turn out on carbs (stock carbs) and after wide open runs not sure how far 4.5 blocks long do a plug reading and plugs are rusty looking even the ground strap bike seems to run fine little boggy from idle off but other then that fine please help going bald
  2. running belray tranny oil and both plugs are the same looks like rusty steel
  3. not sure whats going on pulling out my hair bike ran fine going to the dunes wanted more power little low on comp, so i put new piston and rings in and went from 21cc to 18cc domes went from 130lbs comp to 188 comp running vp u2 110 octane fuel and amsoil series 2000 at 50:1 i have 300 main jets and im not sure what pilot jet with 1|2 turn out on carbs (stock carbs) and after wide open runs not sure how far 4.5 blocks long do a plug reading and plugs are rusty looking even the ground strap bike seems to run fine little boggy from idle off but other then that fine please help going bald
×
×
  • Create New...