revedup04
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by revedup04
-
I figured it out the exhaust pipes had about 1/2 gallon of gas in them. Dumped them out and it started right up. what would cause this?
-
its a new stator maybe a month old. if the headlight start to light up when you kick it over doesnt that mean the stator is good? i will double check the pickup gap. thanks
-
its getting late so im going to make it short and sweet. it wont start, this is what i checked compression 120 on both sides,spark good on both sides, its getting fuel, reeds are good, and new plugs. the old plugs were soaked with gas when i removed them. what does this mean?anything else i should check? all advise is appreciated thanks
-
no one can help me? anyone with the same setup?
-
ok i have a fresh rebuild and am adding some 34pjs. i dont know what jets i should start off with. they currently have 158 main and a 34 pilot. the motor is bored .030 over, the stock head milled down .020, pro cuircuit pipes, boost bottle, and im at 600 ft above sea level. thanks for any help.
-
im looking to buy a right side cylinder, both if i have to for 00' banshee. they can be bored up to .20 over.i have a .30 over kit. looking to get them as soon as possible. can also pay with paypal.
-
i have a set of used pro circuit silencers for sale. still in very good condition. no dents or dings. any reasonable offer will not be turned down.here is where i bought them from http://moto-man.com/catpages/details.pg?item_num=@1097. i can post pics of the now. but cant till tomorrow.
-
pm me with offer.
-
yea i took it apart and there is no screen. do you think a piece of wire mesh would work. what is a spark arrester made out of? thanks
-
i have some procurcuit pipes and silencers i bought new about 2 years ago. now where i go riding at it is required to have spark arresters. now i know they had them when i got the new but now when i went to go there this year the said that they dont have none. is it possible for the to burn out? and if so how can i replace. thanks for any info.
-
i have a set of 34mm carbs. they are keinin. the left side coke dont work but it never stoped it from starting. two kicks and she started.it is from being so close to the pipe.http://moto-man.com/catpages/details.pg?item_num=@173. these are them. i will get you some pic of the curently if wanted.