d3xnij

its a yfz450 yes, but i need some help that i dont normaly get on the central. Heres the deal. Ive just put in the new lighter flywheel and now it dosent start. However when i touch a metal bar across the battery's terminals the starter turns the motor. The starter motor turns but there dosent seem to be a spark. What could the problem be? Also ive no chain on the bike as i just put on a new axle and even when the bikes in neutral the sproket still turns, this normal? Anythings welcomed

buddy wants to put a 600cc ninja in his banshee.. im not 100% sure on the idea, i dont think its gona fit, and the swing arm will need to be extended alot so he will only be able to straight line drag ? what do u guys think?

is there any other companys who are good and will ship to the UK or are stationed in the UK ? thanks

i just got my yfz450 and i still got my banshee, but i was wondering am i best to buy a kit or buy things individual ? how many jets should i buy also ? with cam mod/airbox lid removed/baffle out.... then later in the year a 488cc kit with pipe/air filter

whats the difference ? i got a link with both types.. and a few options, not sure what sockets to go for heres the links. maby somone culd help me out. jesus christ -------------------------------------------------------------------------------- Read Message Add Sender To Address Book Block Sender Print Message Move To: (Select A Folder)Trash Can Reply Reply To All Forward Delete Previous Next Close Date: 8/30/2004 6:11:03 PM To: "'[email protected]'" <[email protected]> CC: From: "Hosking, John" <[email protected]> Subject: RE: Online catalog questions, comments 1/4" Drive Sockets: http://buy1.snapon.com/catalog/catalog2.as...+Drive&store=uk 3/8" Drive Sockets: http://buy1.snapon.com/catalog/catalog2.as...+Drive&store=uk

im not exactly sure what to get... its all weirdly set out, flex heads and the rest, i got about 500.. i need a 5-75lbs torque wrench and a set of sockets, if any1 culd find me links to these specific items i need i wuld realy appreciate it.. just if u r bored n got nothing else to do

looking for a 5-75lbs torque wrench and a set of sockets.. does anyone know any links/sites ? any info wuld be greatly appreciated

any websites or anything wuld be appreciated. thanks

is it as important with a 4stroker ?

it was for my 450, is there any websites ?

cant find jardine pipes anywhere

i want to do the daddogriders engine build, it required a 488cc big bore kit and a 5mm longer rod crank, ive got the link to the bigbore kit and im wondering if its the right big bore kit because theres stage 1-4 check it out very bottom, 490cc kit stage 1 http://www.maxpower-engines.com/bb-yamaha.htm will this do the trick ? i forgot to add, it sais i need a lower compression piston to run pump gas, do u know what compression piston i need and where to get 1 ? any help will be greatly appreciated thanks

im in UK ( scotland ) i was hoping to sell all for like

i feal like geting a 450

its an 04 shee with t6 pipes, immaculate condition, it also has chrome quicksand a-arms +2 +1 and a chrome swing arm but the quicksand parts havent been installed yet, i also have the stock pipes. what price culd i sell this for ? in

he has an 02 kx and put on an fmf gnarly, he rejeted but the pipes still way hot, im trying to tell him this is runing lean but he trys to say he needs a smaller jet for more air flow, post the answer here as he can learn from it

what colour of plastics and frame wuld match up well with chrome for duneing ?

i know its hard to believe, i revved it full and it actualy started moving, not rolling but a small ammount of power was moving it, i thot it was just a 1 off but i revved it hard again and it did the same.. what culd it be ? clutch failure ?

i was warming my shee up and started giving her max revs, it started moving in neutral ! is this a clutch problem ?!

i was gona use the fattys cuz they look beter + i do dunes, im in UK thats why i cant get a good engine builder to do the work

at the end of the year im thinking i do this to my shee, duncan racing engine kit ( since i cant find an engine worker ) im in the uk. taking off the ptr pipes and puting on FMF fattys, powercoating the frame candyblue and puting on some white plastics, quicksand a-arms and swing arm, elka shocks and a set of haulers with mowhaks on the front... somthing along thiose lines, tell me what u think... or anything else i shud upgrade, thanks

who does engine work in the UK ?

the 05 models are out now anyway.. only thing i see changed is the swing arm

i hear most people saying 4 strokers suck etc... but why shudnt i get the yfz450 ? yeah i love my shee.. but i cant get the engine work done here where i live.. ( scotland ) so its pretty much stock apart from pipes, shipping is also a killer... so if my shee with pipes was to race a yfz450 with a cam mod and sand tires, what wuld come out ontop ? i realy love my shee but engine work costs to much as id have to ship half my engine to the states.. customs etc all charge for this and id be left with a huge ass bill to pay, thats why im looking for somthing fast stock.. tell me what u think. thanks

any1 with highly modifyed or 4mm stroker vids ?i wana see how fast they are to see if it realy is worth doing