lt250300exshee

i have a pair of sandstar paddles on 9" ipt rims yamaha bolt pattern. great shape has only 10 runs on a 300ft drag strip in dune like sand. I am asking for $200+shipping if more then 1 person intrested price will increase and highest offer takes it. i can get pics if wanted let me know give me your e-mail

02 300ex. I have a 300ex highly modded. It has a powroll cam and springs, ebc clutch kit, DMC "ALIEN" exhaust system, moose low rise handlebars, dirt digger rear tires, stock fronts, 2 itp rims, dg nerf bars, sun star 34 tooth rear sprocket, primary drive 14 tooth front sprocket, ugly{brand name} +2 a-arms powder coated red a-arms, factory effects # plates with n style #'s, maier tether switch, modded cdi box with rev limiter removed, k&n air filter, oil filter, and jet kit, new tie rod ends, just replaced the axle and wheel bearings, vented air box lid, chrome stripping on shaved front fenders, dg front bumper a little tweaked, a set of works front shocks, wiesco high compression piston, if wanted an extra dg pipe, a pair of shocks with rezzies that need rebuild. i'm sure i have some more things but i can't remeber it right now. i will sell if right offer is made but would prefer trade for a trade looking for somethin bigger with atleast performance shocks on the front atleast. if you want pics give me your e-mail unless someone will post them for me i am mainly lookin for a 400ex, 250r, shee, or sumthin along them lines I WILL NOT PART OUT retail value for a stock 300ex is $3200 so base your offers off that or around that reasonable offers only. considering all trades 1}take a trade straight up 2}take a trade and sum cash 3}sell with all parts 4}sell with some parts

the retail value of this quad stock is 3280 and i can take off a-arms, shocks, clutch kit{not yet installed},cam and springs{not yet installed}, nerfs, modded cdi box, new jet kit, 8in beadlocks with turf tammers, dmc "alien" exhaust, and thats about out i can let it go for $2800 obo with out them parts 02 300ex. I have a 300ex highly modded. It has a powroll cam and springs, ebc clutch kit, DMC "ALIEN" exhaust system, moose low rise handlebars, dirt digger rear tires, stock fronts, 2 itp rims, dg nerf bars, sun star 34 tooth rear sprocket, primary drive 14 tooth front sprocket, ugly{brand name} +2 a-arms powder coated red, factory effects # plates with n style #'s, maier tether switch, modded cdi box with rev limiter removed, k&n air filter, oil filter, and jet kit, new tie rod ends, just replaced the axle and wheel bearings, vented air box lid, chrome stripping on shaved front fenders, dg front bumper a little tweaked, a set of works front shocks, wiesco high compression piston, if wanted an extra dg pipe,i'm sure i have some more things but i can't remeber it right now. will sell if right offer is made but would prefer trade for a trade looking for somethin with atleast a pipe and performance shocks all the way around atleast. if you want pics give me your e-mail unless someone will post them for me

I have a 300ex highly modded. It has a powroll cam and springs, ebc clutch kit, DMC "ALIEN" exhaust system, moose low rise handlebars, dirt digger rear tires, stock fronts, 2 itp rims, dg nerf bars, sun star 34 tooth rear sprocket, primary drive 14 tooth front sprocket, ugly{brand name} +2 a-arms powder coated red, factory effects # plates with n style #'s, maier tether switch, k&n air filter, oil filter, and jet kit, new tie rod ends, just replaced the axle and wheel bearings, vented air box lid, chrome stripping on shaved front fenders, dg front bumper a little tweaked, if wanted an extra dg pipe, a set of works front shocks, wiesco high compression piston, i'm sure i have some more things but i can't remeber it right now. I am looking to trade for a mx ready 400ex, z400, 250r, banshee, yfz450, 450r, and any other higher cc race ready wheeler NO BLASTERS 300ex's 250x's 250ex's DIRTBIKES or 4X4 let me know what you got i will try to get pics tomarrow

i am selling it so i can pay off my loans for my truck n the rest of this wheeler i live in glenfield ny runs great

brand new less then 5 tanks of gas ran through lookin for 5800 OBO runs good few extras like ac nerfs, twin air filter, and pro design tether will try to get pics soon. im me at lt250300exshee on AIM, pm me, reply, or send me an e-mail at [email protected]

like brand new 2002 honda 400ex has 2 itp rims on the front and has chrome colored moose handlebars cross bar pad and fmf 909 grips, brand new stock air filter, and nearly new front tires i would like to see around $3500 or best offer i am somewhat negotiable if you are interested you can im me on aol my sn is lt250300exshee or birddog922002 or pm me , have pictures available but i need someone to post them for me thanks

Up for trade NICE 300ex i am looking to trade my 300ex to see what i can get for offers this has over 2k invested into parts. It is a beautiful quad never failed me. Runs strong. Make me offers for trades It has ,works front shocks, moose handlebars, maier tether switch, dg allloy grab bar, ground buster rear tires, UGLY{yes that is a brand} a-arms less then 5 mins of riding on them, lots of sticker, and thats it for cosmetics i believe. For motor is has a dg rcm pipe, 1.00 weisco high compression piston, k&n jets, air filter, um and thats all i can think of right now you can leave me your e-mail address and i can send you pics this wheeler looks sick its the fastest 300 around

upsate ny

only has about 5 tanks of gas ran through it has nerfs, twin airfilter, tehter asking 5800 i will try to get pics i am selling for a freind runs great no problems

they are decient shape i will figure out how much to sell um for tomarrow

i have an 85 lt250r i am parting out everything!!!!!! i need to sell in parts because i can not sell it as a whole i was tring to sell it for only $1200. If you would like to buy it as a whole tell me ASAP if you would like a part tell me what you need i have everything as of right now i will get you a pic of the part within 2 days hopefully and i will give you a price if you would like pics leave me your e-mail address so i can send them to you

send pics 2 [email protected]

i got an offer on the whole thing so i will get back to you if he backs out

make me an offer on the frame ther aftermarkey parts are a uni airfilter, dg pipe{bad shape}, weisco piston, moose hand guards, and a pair of shocks with rezzies{need rebuild}

its an 86 make me an offer i havn't really thought about it yet

let me know what u want cuz theres a lotta parts to go through

sry bout this

i am parting out everythin but the motor tell me what u want n make me an offer

if i had the money ok

85 lt250r in fair-good shape a few mod like a dg pipe, aftermarket shocks, maier fenders, moose hand guards, weisco piston, the outside of the motor was freshly polished, uni air filter, pro design tether and the timing is tuned for racing. i am askin 1300 firm payed 1500 for it last fall n since it has had a few things done and has been gone through to check the condition of it. it runs strong. i am selling this because i am lookin for a mx ready quad. if you would like pics give me your e-mail address and i will send u some.

i am looking for a fairly cheap mx ready quad. let me know what you got and send pics to [email protected]

the retail for a lil over 500 n shipping is about 60-70

k you should have it thknas man

i dk how to post um