hawke

Looking for the inner clutch hub (boss), clutch pancake bearing setup, and 15 tooth front sproket. Small items didn't see on your list but thought maybe youve got them. Thanks Jason

Still triing to sell all together. Still waiting to see if Tim still wants them. Thanks Jason

Tim there still available, shipping is 20.00 Jason

I have a set of 28 pwk with very little use, cable is pretty much knew. Thanks

Sounds good, give a day to let you know the details. Thanks Jason

80.00 not shipped

125.00 SHIPPED!!!!!

I have a complete set of a-arms, tie rods and spindles. The ball joints are good and the bushings where tight. I replaced for some +2's . I am not sure what these are worth. I was hoping to swap for some shocks but did not get any responses. I was thinking about a 150.00 shipped. The only thing missing on them is some dust seals. There not bent or dented, could use some paint on the bottoms. I need some black front plastics, front bumper, billet stator cover, alba tribal graphics red black, or some aftermarket front shocks, yfz's front shocks. Some duel rates without rezzies would be fine, but they have to be useable, not leaking, not bent and resonable. Thanks Jason I have pics can e-mail if interested

How much on the seat cover and radiater plastics? Jason

I have a complete set of a-arms, tie rods and ball joints are good, spindles, the a-arms where tight, I replaced for some +2's . I am looking for some aftermarket front shocks, yfz's front shocks. Some duel rates without rezzies would be fine, but they have to be useable, not leaking, not bent and resonable.

Looking for some front shocks aftermarket? Jason

Now he knows what the back end of a banshee looks like!!!! The End

I knew this question would be asked.... I have a friend with a ltr450 and we raced the other day on a paved road and a dirt rd. I had him out of the hole and up until I hit 5th gear. Thats when he went around me slowly At three hundred ft I had him but then he ould stroll on by. I began to question my gearing which was 15/42. I did find some problems other than my gearing. I had put the lock up on and did not notice before I raced him that my rear brake would never fully release as it was hitting the bottom of my lock up. When I got home from the race I could barely push my bike into the garage my rotor was so fuked up. I also was running to fat so I lowered the main a couple. To answer the question I would like to have a trailable gearing probaly leaning towards the top end for the accosional 450. I bought the bike in a basket and it was the first race with it. I am starting to think it wasn't the gearing s fault but would like some other opinions. Thanks Jason

I have a 01 banshee with t5,K&n filters Pro flo, 28 pwks, Majics racing billet intakes and cages, billet basket, dirt digger kevlar set, lockup clutch and gncc holeshots. I am wondering what gearing I should run. I was thinking 14/40 with my 20 inch holeshots shouldn't be a problem, am I right? Thanks Jason

I need a seat how much shipped to 48240? Thanks Jason

How much for just the seat and seat cover?

I need a seat all black and I was wondering on the front bumber 3 bar black one. Let me know how much? shipped to 48240 MI Thanks Jason

Do you have any seats? knewer If so how much Thanks Jason

SOLD thanks

I am going to put it on craigslist also. This is just my asking price. Thanks Jason

The frame needs a paint job or powder coat. There are quite a few chips but the frame is solid. I have more in my rebuild than I am asking. I also have a full ac belly skid plate and 5 gallon vp racing fuel jug.

yep

Here are some pics

I live in Redford and I'll have pics tonight hopefully if not tommorow. I will give a bill of sale with the quad and any other info you want. address, drivers license #, whatever. It also has a +4 degree key and renthal bars. Thanks Jason

I have a 87 banshee 350 forsale. It has toomey t5's with black headers and slightly polished stingers. The engine was just redone complete. The bearings and seals where replaced, barnett kevlar clutch pack with pancake pushrod mod, knewer basket stock, wiesco piston, and reeds all have less than five hours. The crank is true and welded, and it has pod k&n filters. It runs really strong. I am asking 1600.00 and I am located in Michigan. Thanks Jason Will post pics soon Let me know what you think