[keihin PJ set]

I got rid of my banshee a few years ago and came across a set of carbs intakes and air filters that I never got around to installing, they were used when I bought them, good condition, I paid $400, for the kit, and would like to get that back if possible. Email me for pictures,I think they are 34mm

 

Jasonroxchevy@yahoo. Com

 

Thanks and have a great day.

[34 mm flatslides]

well anyone want to buy these carbs, I am tired of researching them, and will just buy some keihn 33 mm

carbs I guess and be done with it, since everyone seems to know them better

[34 mm flatslides]

as for mods.....

basic bolt on stuff....

+8 timing (plate )

shaved head (.030")

drag port

T-5's

wisecos 1 or 2 bores bigger than stock, I forget

lightened flywheel

stock reeds

stock carbs w/

300 mains

 

should I just convert these carbs to alcohol?

[34 mm flatslides]

anyone? anyone?

[34 mm flatslides]

on tm series carbs (flat slides) the dump tube is the piece that the main jet screws into. and mates to the needle. different diameter/taper replacements are available,

[34 mm flatslides]

please help......anyone????

[34 mm flatslides]

I have p-6 dump tubes, and looking for the right needle to match? anyone w/similar setup? the needle from the old dump tubes won't fit the p-6?

[mikuni tm flatslide carb help]

bump

[mikuni tm flatslide carb help]

hey what size dump tube are you guys running?

[34 mm flatslide mikunis]

well???

anyone?

going out to Glamis next weekend, anyone else?

[paul turner mid pipes]

I had the mids, absolutely best pipes ever had, quality and fit, they were tough, pulled like a 4 stroke off the bottom and a little more on top than stock pipes great all around pipes, then I switched to Toomeys T-5 look

beautiful, run great top-end wise, but I break mounts/tabs, and the silencers always leaking, lot more maintenance.....get the mids if you don't absolutely love them, someone will trade you something cool for them.

[Chain Length and Gearing]

I agree w, the recommendations, but what height tires are you running?

 

recommend 15t front w/20 inch paddles, and 14 t w/22 inch paddles

 

agree 15-45 sounds close to stock gearing

 

w/your mods I would guess 15-41/42, 14-39......

[34 mm flatslide mikunis]

what are your mods? i switched to 34 tm's a month ago. let me know, i'll try and help.

sounds like similar mods, which dump tube are you running? I see you have 370 mains?

[Finally Dropped the 2 into 1 set up]

I have barely finished my eighth beer-and I understood pefectly....keep on keepin on-2-1 sucks-dual 35 mm carbs are for woods/trail bikes and stock carbs are for highly ported/stroker/hill racers........

makes sense.

burp\

[34 mm flatslide mikunis]

okay.....anyone? please tell me which needles to run w/p-6 tubes?

 

thanks Ireally wanna run these carbs

[34 mm flatslide mikunis]

5fp17 needle?

 

anyone know if that will work with my p-6 dump tubes?

 

I missed changing carbs at thanksgiving, but have some down time now, next trip not til January.....

any help please?

[34 mm flatslide mikunis]

please help, thanks giving is in two weeks, and I want to try these carbs.

[34 mm flatslide mikunis]

bump

[Need chrome?]

well let's see some of their work already!!!!!

[Rear Swing Arm Size]

I like my plus six arm, nothing like riding a wheelie and feeling like your ten feet above the ground....

I only ride sand and it works great for me, I would hate to ride in the dirt though.

[wot flat]

I have a 01 with t5, comp is good, new reeds, air box cover removed with a k&n air filter. It is flat when it hits wot, it idles great, starts first kick and mid is great. It has 330 mains, is it lean or too rich. thanks for the help robertg

A few questions first

what elevation are you?

compression good, how good? how 'bout some numbers

extra timing/porting etc.?

I would be willing to bet you are way too big on mains....I have similar setup as you, with big nasty port work, and am only running 300 mains right now...w/stock carbs

what do the plugs tell you?

[34 mm flatslide mikunis]

okay I ahve some 34mm flatslides I am trying to get to a starting point on the banshee, they came w/

mainjet 150

pilot 35

dumptube/needle jet R-O

needle 6fp63

 

I have since acquired P-6 dump tubes, 280 main jets, and 40 pilots, my question is what needle do I need to run w/these needle jets/dump tubes? currently with these large needles, the slides will not close all the way, even with the idle screw out, and needle on the furthest clip, obvious needle to dump tube fit is incorrect,

 

any help wwill be appreciated, thank you

[GLAMIS! NOV-1st -4th / Who's coming...?]

I will be there the weekend of the 2nd-4th november-either in wash4-5, or if no room other group wash 17.....

04-red/white, w/a cooler full of keystone light.....

[stock>>>>t5's,k&N pods]

lean is mean....I have huge porting and lots of timing/compression and run 290 mains w/pod filters and T-5 pipes.....I do have 27.5 pilots too.......believe it or not my plugs show a little rich.....

[pt mids and silencers]

I ran the stock silencers w/paul turner mids......best setup I ever had, then I got T-5 pipes/silencers, have had a lot of problems w/the mounts, tabs breaking, and stuff......should have kept the paul turners....