Onesickcrewcab
-
Posts
654 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Onesickcrewcab
-
-
-
-
-
Arms are in great shape. Only a few dune trips on them. Asking 200 + Ride. Comes with tie rods, You will need the lower dust caps and crush sleeves.
-
I have a +12 Chrome ladder bar style swinger for sale. I got it off ebay awhile back and not sure who made it. I know it was made with JJ&A parts. Chrome around pinch bolts is peeling due to the flex from tightening and loosening the pinch bolts. Comes with Regina Chain, Brake line, Upper and lower chain slides. Has good bearings in it. Asking 375 plus the ride. Low ball offers will be ignored. I have parted out the rest of this bike.
-
I have a set of CPI BB SF drag pipes for sale. They are both out of the stator side and silenced. Asking price is 475 + Shipping. They are in near new condition. Low ball offers will be ignored. These pipes retail for 645 new plus shipping. They only had a few runs on them.
-
i'm looking for some out frame drag pipes need big bore if cpi's and prefer silenced but not gotta have. just whatcha got? i have a set of inframe cpi's non stamped for trade or possibly trade +cash..
will sell cpi's for 350 +shipping
I have a set of BB SM OOF CPI's that are silenced. They are like brand new. They are both out the stator side. Asking 475 plus shipping.
-
looking for round carrier! cyclinders, ofsb pipes must be shearer, carbs, axle, custom painted plastics etc!
I have a +12 laderbar style chrome swinger. Comes with regina chain, chain slider and guide. Has bearings in it. Asking 450
-
i really dont know what all this will entail, but its sounds like itll be a lot better..
the new skin should show up everywhere in the forums. do you have BansheeHQ Carbon selected from the drop down menu below?
Rubberneck is talking about the white background behind the text in the chat room. Before we used to be able to choose a color background. We are all hoping the new update lets us do that again.
-
The voltage regulator underneath the seat near the cdi is either unplugged, missing, or bad.
-
Last bump
-
I would agree that you had an air leak most likely. Also might want to make sure the float wasn't stuck in your carb and that side was getting fuel.
I personally would take the motor apart and inspect.
When you put it back together you need to do a leakdown test. If your not sure what that is. Here is a thread for you
-
-
Good Lookin out Greg. i got a flywheel I will let go for 70 shipped. Threads are good.
-
I got some skat trak mohawks. 150 shipped.
-
All PM's replied to.
-
-
Got some parts left from my partout. As follows
Front Spindles - 50
Front Brakes - 85 (From Lever to brake calipers)
Steering Stem - 25
Handlebars - 25
Radiator - 25
Trail Tech lights - 75
Rear Swinger Linkage - 30
Rear Brake Caliper - 80 (with block off plate)
Rear Master Cylinder - 30 (with rez)
Rear Grab bar - 20
Seat with gripper cover - 60
Front hubs - 45 (with rotors)
Kicker Gear - 35
Complete wiring harness off 99 shee - 50 (No CDI, Coil, Or stator)
Stock CDI - 80
Stock Coil - 30 (with NGK Caps)
Flywheel - 70
-
Now that is sexy!
-
Sorry forgot to update this. All items are sold.
-
the extra head with 24cc domes, is that for race gas or pump gas?? what was the comp with those??
The compression when tested with those was 200 PSI. Thats why i went 27cc domes.. which put it at 175 PSI
-
Last bump, then its off to ebay.
-
I still have the crank. Waiting to hear back today on a possible sale.
Crank SOLD!
Still have the cylinders, pipes, and cases.
-
I still have the crank. Waiting to hear back today on a possible sale.
CPI BB SF OOF Drag Pipes Chrome
in For Sale - Parts & Accessories
Posted
UP!