yambanshee420

I have a pro flow intake with no airbox lid. When i pull the plugs they are wet and it shows other signes of running rich like backfiring. It bogs like hell bottom end then once it gets past that it pulls real hard and then it seems like it doesnt rev out like it should. Ive tryed leaning it out and it didnt work went all the way down to a 40 from a 48 and could see hardly any difference.

Ok today i tryed pulling the are filter and that wasnt the problem. I also swaped out the coil and that had no effect eather. Im lost someone please help

bump

This is interesting becouse i am running a pro design intake. I will try taking it off tommorow to see if that is the problem. The needle is a dgk on the 3rd position and the pilot is a 48

Ok i got a shee with a Trinity c.v carb kit, fmf's and a few other miner things. The problem is i cant seem to fix the bog it has in the bottem end. So i took it to the shop and they said it sounded like it was runnin rich. After many tries they said that it wasnt responding to any jetting changes for that rpm range. They then thought i could be the reeds but they cheacked out fine. They eventually gave up and told me it must be something electrical. Now I have no clue what to do. Also it has 120 pounds of compression so i dont think that is the problem. Has anyone over herd of this or know what it might be.