banshee builder

Hey guys (and gals), I have done very little listings on here but I would like to let everyone know that I do cylinder boring. I do minor polishing and no porting. I had been in the atv and bike business for the last 12 years and I finally went out on my own. I have my own equipment and I also am set up with a few distributors so I can get your pistons and gasket kits at a reasonable price. I charge $25 per cylinder plus return shipping. I always bore the cylinder to match the piston so you can either send them to more or I can order them for you. my turn around time is 2-4 days depending on whether or not I have the pistons in stock. Like I said before, I know you guys don't know me so nobody can vouche for me or my quality. The only thing I can give you is that my user name on ebay is rdr8cr and you can watch on there.. I just sold 2 blaster cylinders on there that I had bored and will probably be listing 2-3 more this week. Any questions feel free to email me at dvdjrrtt@aol.com thanks

I've got a brand new set (never opened) or Works Dual Rate Spring SG2 A-T Steelers front shocks that are set up for 150-195lbs. These are for +2 a-arms. Again these are brand new. They retail @ $379.00. I would sell them for what I paid for them which is $327 plus shipping to you. If interested send me an email at dvdjrrtt@aol.com . I can send pictures if want. These are the non-resevoir type-blue and white springs. Thanks

unfortunately if the one cylinder is re-sleeved the other needs to be taken to the same size as well. It generally runs a couple of hundred bucks to have sleeves installed (correctly) plus the cost of the sleeves. Give me a price-I don't need a set but I do need some scrap cylinders to do some experimenting with new tooling on the boring bar. Give me a price, if it seems fair then we'll work out payment. thanks

does it need re-sleeved or bored? what size pistons were in them? how much are you asking? thanks dave

check your pm

I sent you an email with pics.

Yes it does sound redundant-read through my previous thrashings on this post and I think you will get all the information you need. Also I did try to post a pic but it didn't work. If you would like a picture than email me and I will send you one. thanks dave

HOLYMAN- I posted this earlier to you-and this is the only picture I have of the motor. I keep the pictures in my system until I know the customer has it installed and is happy. Then I get rid of it and move on to the next. If you would like to see my 2 other motors (yes they are blasters and not banshees) they are listed on EBAY right now (#2436870782 and #2437328729). If you would like to verify the last banshee motor I sold on ebay then go to EBAY and enter #2427208556 into the search box. This will pull up the last one that I sold on ebay. I pulled my records of what was done to the motor and found my listing number. My id is "rdr8cr" on EBAY. I will update my profile and I would be more than happy to email you a picture of my garage where I do my work. It's not much but it keeps me busy. Send me your email address and I will send one. I tried putting a picture on here of my banshee but I couldn't get it to work. Also the only reason I have been able to respond so quickly to these "thrashings" is because my real job is slow right now. Thanks for your concern

I appreciate that and I will do that. thanks

Somebady emailed me and from ebay and wanted me to copy their note so here it is: "Hello I have a question .If you are the same person from the bansheehq forum selling engines under the name banshee builder ???? .if you are please post this in the forum so I can see and prove you are .I am trying to verify who someone is and they said this was their auction If not please let me know thank you very much " this was sent by EBAY member id:nellewest I am who I say I am and I appreciate you asking. thanks

no I do not and if you order atv engine cases from yamaha they are not stamped and the cases are not shipped with titles. Like I said I do not have a title but if needed I am happy to provide a bill of sale and notorized if needed. Thank you

If you are so interested in my replies and my posts you should read all of them. Because I DID say that COD would work for me. The reason I gave my ebay item number was because that guy asked for it. If YOU have a question for me I would be happy to answer yours as well. Like I said in my other replies-if you are interested great...if not --great. I am only trying to provide a less expensive service. I fully understand everyone's apprehension. I am new here and know absolutely nobody here-so does that make me an a**hole like you are trying to represent me as? Yes I get defensive when I am called to the carpet by people that DO NOT know me nor my work but feel it is in their best interest to step on me. Like I said, I appreciate you and everyone else's attitude about scam's and looking out for each other. Unfortunately though I don't know anybody here and haven't done work for anyone here -so no sh*t people are going to be apprehensive. Have a great day and keep up the good work.

HOLYMAN- if you would like to verify the last banshee motor I sold on ebay then go to EBAY and enter #2427208556 into the search box. This will pull up the last one that I sold on ebay. I pulled my records of what was done to the motor and found my listing number. Thanks for your concern

I know that anyone can say anything about whatever. Actually I wish I had the time to do that. So for everyone else that reads this let me just say that I appreciate how much everyone here looks out for each other. I also understand that I am the NEW GUY here. I don't bullsh*t anyone about anything. If you are interested in my work-great..it is appreciated. If you aren't interested that's great also. If you use me and don't like it you can post whatever crap you want about me, but don't put down my work if you haven't seen it. I know there are alot of scams and everyone needs to be cautious. I am not here begging for work. I have a REAL job that pays my bills. I am an enthusiast like everyone of you reading this. I don't have time to ride but I do enjoy wrenching on them. Take all this for what it's worth, all I ask is that you base your opinions on facts and not necessarily a bad transaction you had somewhere else.

I Never said that the 2 reference numbers I gave you were for blaster motors. Ebay only holds #'s in my system for 30 days and the last banshee motor I sold there was longer than that. The only reason I was telling you about EBAY was to check my feedback. I understand you guys all look out for each other and I appreciate that and also understand that I am the "new guy" here. If you want to buy from me or use my services-well I appreciate it...if you don't--well that's your desicion and I can appreciate that also. You know everbody has to start somewhere and my work work has all been done locally and I am trying to get beyond that. SO, if you pissing on my cheerios makes you the feel like you are the king sh*t around here then more power to you. In case you are unawhare-respect goes both ways.