![](https://www.bansheehq.com/forums/uploads/set_resources_8/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
![](https://www.bansheehq.com/forums/uploads/set_resources_8/84c1e40ea0e759e3f1505eb1788ddf3c_default_photo.png)
Bangixxer
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Bangixxer
-
-
It's not a jetting problem, just because I have done nothing to it with the exception of removing the parking brake assembly. It only idle's when I depress the pin on the cable, otherwise it revs out of control when the parking brake is disengaged. Thanks again.
-
Let me first give you some background information...I have not ran my Banshee in close to a year and has been apart for some time. Well, I finally got around to putting it back together this past weekend and when I went to start it, all it was doing was revving to the sky. After thinking about it, I realized that I put a new clutch cable and perch on, eliminating the old clutch lever/parking brake assembly. So I started thinking about it and figured there may be a problem with TORS and hooked up the connection for the old assembly into the TORS system and when I pushed in the pin, as if I set the parking brake, it cut the revving down to an idle, but when I pushed the throttle, it bogged. Does anyone have any ideas? I don't believe I have an airleak, but is there any sure way to find out.
I thank you in advance...Rob B
-
What do you mean you can get a bare set for $220...what does bare mean? I have not decided on what to do with the engine yet. That is my project this winter as I am doing a full rip-down and rebuild. Also, what is CPW, I am assuming that is a place where I can get the carbs?
Thanks again!
Rob B.
-
I have to get rid of my stock carbs, nothing but problems with them. I am currently running SST exhaust with Pro-Design Proflow kit. Thinking of Vito's 404 kit and V-Force Delta valves in the future...what do you guys think works best...Keihn 28 PWK or Mikuni 28 flatslides. Any help will be appreciated.
Thanks in advance...Rob B
Please help...not sure if TORS or air leak!
in Banshee Repairs and Mods
Posted
So what should I do...do I have to eliminate the entire TORS system now or can I just bypass the parking brake assembly.
Just out of curiousity...should it bog rather then rev out?