99fastshee

Year model stator?

Modquad is only 1 year.JJ&A is lifetime.

As the title says,stock uncut flywheel needed.

Have 5 sets of stock carbs.3 with tors eliminators and 2 without.$80 per set.

Yes i do and they look to have either never been mounted or mounted and taken off.Still has the installation instructions with em.Pics sent.

pipes are sold

Shocks and arms sold and shipping out in the morning.

Works shocks with resevoirs,whole set front and rear for 180-200lb rider-$300 +2 arms with tierods,not sure what brand,good shape-$150 AC Propeg nerfs,almost new with black nets and all hardware-$100 TORS eliminator caps,no cable or idle screws-$20 Blue JJ&A 35mm carrier,never installed,this is one of their refurbished carriers with new bearings-$99 2 trinity single carb intakes only new in package,just the intakes-$75 each 1 set of old school chrome cpi drag pipes one out each side-$200 1 set of fmf powercore silencers with mid pipes-$50 hs customs 1 piece front nose piece with stainless spiderweb grill,still white gelcoat finish-$300 1 chrome stellar bolt on subframe never mounted comes with all hardware-$300 10 paddle sls on douglas wheels-73 rollout-$300 front 12.5 shaws-$200 Modquad drag axle-$375 Modquad carrier 40mm-$125 20.5x10x10 American racers on douglas wheels-$250 I have more layin around I'll list later.Will get all pics taken today.

We will be holding the first race of the year in Annona,TX the last Saturday of March.It is a groomed 300ft track with 7-900ft of shutdown with NO lights.Just good ol' fashioned armdrop grudge racing.We'll start around 9am.Everyone come.

Don't be afraid to shoot me some offers.

All pics sent and pms replied to.

pics sent

Pics sent

Pics sent.Buy the whole set you can have em' for $275 shipped to ya.

All pics have been sent.

Pics sent

Will do man.Thanx.

1 set of CPI sb inframes,decent shape,have a few welds on em.Chrome is in good shape.$300 1 set of LRD adj,good shape,$200 1 set of fmf fattys,need rechroming but no dents-$75 1 set of front 1 inch wheel spacers-$30 1 rear works shock,excellent shape,set up for 190lb rider and stock swinger-$250 1 set of white front shocks,good shape,$50 1 White Knuckle billet head,no domes,-$75 1 set of almost new douglas front wheels,10x5,.125's,one has very small ding in lip,not noticable with the tire on,$50 for the pair. 3 airboxes with proflo intakes-$35 each 1 terry cable throttle,black,new in original package,$100 1 Motion Pro clutch lever,black,new in package-$10 1 set of 66.50 stock port cylinders with new wisecos,pistons still in boxxes,fresh hone on cylinders,no studs,$200 1 set of white knuckle 34-36 intakes,need boots,$50 1 nology coil setup,brand new never insatlled in original packaging,coil,wire,boots,-$100 2 front smooth buff,sls on douglas wheels,$100 Can get pics of whatever you need.Prices do not include shipping.

Man I wish you were closer,I'd throw ya some cash for the whole bike in a heartbeat.

Your swinger is boxxed up ready to go out man.Thanx.All 3 bikes sold pending one big payment.

pm sent

350cc drag banshee dragport stock bore wisecos trued and welded crank stock head cut for alky cpi sb oof 35pwk's alky streetbike clutch 8 over swingarm brand new never ridden on 10 pdl sls 21x12x8 and sls mohawks in the front on .125's chrome a-arms,swinger,footpegs,stem,pipes,axle,brake and shift lever fullbore front race cut rear painted black this bike has been rode 3 times since completion.The only bad part is it was built for a girl so the frame is pink and stock tranny is still there. $3700 obo 01 model drag cut plastic CPI sb inframes pod filters 6 over arm( I know,needs to come off bad,gotta stocker you can have) All other stock,clean bike,$2200 obo 03 LE Trinity inframes douglas front and rears needs new tires otherwise stock $2200 obo 2000 pw80 excellent pitbike decent shape $750 Will have pics up asap.

Yep,he's right.You can adjust the chamber length for more low if ya want but they are currently setup for mid-top. I have pics already but they are at my shop. I'll post em' tomorrow.

Nah,he's wantin' drag pipes.BTW these are the adjustable pipes.