Jump to content

Foobie

Members
 View Profile  See their activity

  • Posts

    106

  • Joined

  • Last visited

 Content Type 

Posts posted by Foobie

  11. Jetting Question

    in Jetting & Exhaust Forum

    Posted

    Ok here is my setup, hope this helps.

     

    Stock motor

    2n1 Dynoport

    Stock carbs

    Airbox lid off

    K&N with proflow adapter

    Reed spacers

    FMF Carbon fiber power reeds

    I run amsoil synthetic at 50:1

     

    Jetting: Stock pilot 1.5 turns out

    Stock needle one notch down from stock (richer)

    310 mains

     

    You could try the same as mine just run 290s since you have your lid on maybe even 280s. Just do a plug chop to verify.

     

    It runs stong. I was having a problem with over heating so I went from a 300 to 310 just to see if that helped and damn I found more power so I must have been running too lean. I am going to try 320s this weekend to see if I can find some more!

     

    Hope this helps. I used the Banshee jetting guide in the FAQ section to get close with my mods and it took alot of the headache out.

     

    Dustin

  24. Racing Pics

    in MX Forum

    Posted

    My Elkas are just the plain old sport dual rate no resi version. They work great for MX but start to fade after 5 laps on a big air track. Well worth the money and 100 times better then stock. I also have the dual rate Elka rebuild on the rear. Love that thing too!

     

    Dustin

BHQ Quick Links

×
×
  • Create New...