typhoon1911

Hey everybody, I am going to be doing a clutch replacement and modified shift star install. Can anyone tell me what is needed as fas as gaskets or o-rings and such. I have the OEM service manual, but you know they don't list everything. I have heard that now is a good time to change to a billet water pump. I have a 2004 Banshee with a Toomey TR-6 exhaust/jetting, a K&N (Pro Design) filter kit and an EHS airbox cover. Thanks, in advance, Alan

Hey Everybody, I will be doing a clutch install and the shift star mod shortly (I did it all the time on my 90 Blaster, but so far none on the Banshee). I got the gist of the shift star mods using these instructions, and I read the OEM manual, but I was looking for any tips from the seasoned pros (like soaking the fiber disks before installing them) Or if the Clymers has a better write-up to change the clutch. Thanks for the help!!! Alan

Is it similar to the Direct Drive setup? Is the cover a modified OEM unit? Is this a limited supply? Thanks, Alan

Yeah I didn't think they would offer any discounts... Thanks... Alan

Does anyone know if Cascade Innovations has any Banshee HQ discounts? Thanks, Alan

Hi, Did you sell the exhaust clamps? Also do you have the stock carbs? Thanks, Alan

Thanks for all the great replies. I was just worried because it looks a little different from the ones I saw. Alan

last one

another

Hi Guys... I purchased a Shift Star which was modified some time ago and never installed it. Can someone look at my attached pictures and tell me if this is OK? It kind of looks flat on the hills to me. Also, what is the the distance for the Neutral detent? Thanks, Alan

Is the Speedo better than the Vapor? Alan

What year is the stock carbs? Do you have any pictures? Thanks, Alan

Hey Everybody, I am looking for a set of stock carbs. PM me and let me know what you got and what you want for them. Thanks, Alan

I am looking at getting a Chevy Colorado or the GMC Canyon Crew Cab Truck. Does anyone out there have one of these trucks to carry their quad? The measurments are: 57 inches wide and 61 inches long and add 18 inches for the tailgate height (about 80 inches total). I have a stock banshee. The dimensions are: 43 inches wide and 73 inches long. The specs on paper look like it will fit (with the tailgate down), But I'd hate to get the truck and find out it doesn't. I don't want to use a trailer...I have a hard time to stash the shee, none-the-less a trailer... Or if anyone has any other suggestions on a crew cab compact truck (like Toyota or Nissan?). Pictures would be great!! Thanks, Alan

Thanks for those tips... I'll clean them off the quad... Alan

I looked into my intake the other day and saw that the carbs were filthy. Is it okay to use carb cleaners such as fuel additives or carb spray? If so, is there a preferred type? Thanks, Alan

Thanks to everyone who replied to my request. I found one. Alan

Hey everybody, I am looking for an unmodified airbox & lid from a Banshee... Let me know what you got, the price you want and pictures if you got it... Thanks, Alan

Is the 600 different from the 800? Where did you get the 50:1 ratio from? I read that the 2 stroke bikes use 50:1 with the 800 Thanks, Alan

Thanks for the info... For those that are curious... I am sure 4 oz to 1 gal is 32:1 Alan

Hey everyone, Has anyone used the Motul 800 2t Off-Road Ester Synthetic Pre-Mix Oil? I bought it without doing any research. If you do, What ratio are/were you using? Thanks, Alan

I don't think it will last to long though... Paint + Stainless = non stick... Thanks anyway... Alan

Does anyone know of black colored steel braided brake lines?

Happy New Years... Does anyone know of a website Fastline? Specifically brake lines. I looked all over and I can't find it. What I am actually looking for is black colored steel braided brake lines. So far Fastline is the only one. Any others out there? Thanks, Alan

Yep, born and raised here... Thanks everyone for all the pictures... Alan