SD1026 Posted May 2, 2009 Report Share Posted May 2, 2009 When I first got this bike I changed the ringes gave a fast hone new o ring for the vitos hemi head and did two ridesans in two 5 hour rides with no problems.started fine tunning the jetting and a steady nocking started in the clutch cover opened her up and the was slop in the basket and a extreamly loose idoler gear. I installed a new basket and a idoler gear. Started her up and same nocking can it be a bad impeller. Quote Link to comment Share on other sites More sharing options...
wacko2000 Posted May 2, 2009 Report Share Posted May 2, 2009 Sal but we dont know how long the bike was low on oil also. I dont kno if that could have anything to do with the noise we are hearing. The bike is 80. over with fresh rings/hone and 182psi Could this be piston slap? How can you tell if so? thanks Quote Link to comment Share on other sites More sharing options...
Dick Wheels Posted May 3, 2009 Report Share Posted May 3, 2009 Sal but we dont know how long the bike was low on oil also. I dont kno if that could have anything to do with the noise we are hearing. The bike is 80. over with fresh rings/hone and 182psi Could this be piston slap? How can you tell if so? thanks It was only low on oil because I stood the bike up to pressure wash it before bringing it to you and the oil drained out the overflow/vent tube and i forgot to refill it. That's why it is all over the rear shock linkage...just a heads up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.