Bobman13

Ok Just got mine installed and I have to say wow what a product, First Skid plate that had excellent Fitment and function and got it for a good price through RMATV. Here a link to there site http://www.utahsportcycle.com/store/page85.html Will post pics later.

Got the Same Run around from them as well had many many frustrating calls to scott and Golden West, After all was said and done I got them installed with the Elka Lt shocks, Went ridding and things are so far so good, I took the leager name of the arm-s to say f%&k them as I don't advertise for company's that suck. Would never go with them again not worth the money. I feel for you man.

I belive roll design has the +1 long travel a-arms and I belive there is some still on ebay trying to sell a set. I currently just got my set of leager +2 LT setup wiht elkas, I don't recomend this route after my recent experience. And Houser makes A LT setup as well.

Ok sorry, I haven't got back on here in awhile. Finally got my Freaking a-arms from leager and just as I figured Great welds but crapy Powdercoating and handling care, I'm am very discusted with there product and customer support and to top it of there isn't even any Waranty for the damn things! For those of you wanting this setup stay away from leager after my experence latly they arn't worth the money, still would say that there are a graet a-arm but shitty business ethecs every since the sold out to the new owner's.

Well I don't really have anything nice to say about GWC but at leat they were only telling me what leager was telling them. I spoke Directly to Scott at leager about my A-arms and He basically brushed me of saying powder coating can take awhile to set up, (B.S.). I know that I'm not some multi-million dollar corprate race team but hell my 2 Grand ought to count for somthing.

Ok So here goes I need to vent a bit. Back in Febuary the 12th to be exact I placed an order through Golden-West Cycle For a set of Ekla Lt Shocks and Leager Lt a-arms, the web site said it would take 2-3 week's for delivery of my order and that is what one of there sale's guy said as well. Well 2 week went buy I checked there site and there was a tracking # for my order It was the shocks from Elka man these are a work of art, Couldn't of asked for a better shock. So I called GWC and asked when I should get my a-arms and they told me in about an other 2 week's. So patiently I waited for my arms and 2 weeks later I called them up and they told there were still working on them at leager, but they'd let me know when they would ship. So after many phone calls to GWC on and off agian I was told last thursday that they are going to ship out friday of last week, Cool I thought. So today I called to get the Tracking # and the told me that they were still at the powder coater, My responce was" that's what I was told 3 Week's ago!", after holding back my anger I asked for Leager's # and proceded to call what a Waste of time, Tere is not one sole there that give's a damn about the little guy. I am so pissed off I am ready to just say F'it and cancel my order but I really don't want to have to deal with this again with some other company. Sorry for the rant but I'm not the only guy on here waiting for their a-arms ::

I recently placed my order with Goldenwest cycle back in Feb 12 for the Laeger Lt setup and I'm still waiting on the A-arms as well, I keep getting the run around, I feel for you man If i didn't really need them at this point i'd be canceling my order as well. What Color did you go with!

Spoke to Kevin at herjugg and asked him a similer Question, His responce was that the 33 would retain the bottom end but would not provide a strong top end compared to the 35 he did recomend either the 34mm PJ or the 35mm PWK all around he said to go with the 35mm. However I also talked to Cascade Inovation's They told Me that they recomended the 28mm PWK all around with the Dune Port on stock Cyclinder up to a .060 over bore regardless of stock or +4mil crank, and that he personally has never had good luck with the 33PWK. He did tell me that he would only suggest that you get the 35mm PWK's if you were going with a cheetah Cub setup and 4mill on Up. Now Personally I have had excellent results with the 28MM PWK's and I had a Mild Dune Port stock Bore/crank and It worked flawlessly for me Never had Jetting issues at 5000 feet or at sea level I did rejet the maind ofcourse for the diff. alt. but it was pretty much set and forget. Now I know that Duncan Racing National Kit has the options for the 35mm PWK but the use the 34mm PJ with Great results over the years and that motor was stock bore and Crank, But highly ported. so the choice is yours!

Note Really You can have a piece welded on But it would still involve taking the Swinger off, I suggest you try E-bay for A complete Replacement You can alway's find good deal's for 100 to 200 dollars with a carrier.

Yeah Graveyard Great, I sugest try soaking it in somthing like PB blaster or WD40 and let it soak in, I also had similare issues I had to use a brass punch and gently persuade it while supporting the Rod.

Id say go with Bigger Carbs maybe 28mm to 33mm Pwk's oo once you port it 35's, As far as upgrading you coil I would go with a PVL ignition or 200 watt stator, Or probably a Programable CDI like a Dyntech. Should Help overall. just my .02

What is it that you need I Have 2or3 inner hubs 3 Pressure plates and several othher stock Parts If your looking for a clutch kit I would go with Tusk as Good I.M.O. as EBC's

You should be able to check the resistance of the coil with an ohm meter If you show about .1-1.0 ohms its good if higher or non at all its bad. I hope this helps.

Its For the RZ350 Tach Drive System, It's Cheaper for Yamaha not to change there Mold. Don't worry about it.

Motion Pro makes one there anywhere form 20 to 40 dollars, You should be able to get one through your local shop or E-bay, And I've never used one for the banshee so Im not much help there.