OKCterror Posted August 11, 2008 Report Posted August 11, 2008 I have dual duncan carbs on my 90 banshee that are both jetted. I just got done with the break in process and rode it hard for the first time today. I was going threw gas like crazy, finally my wife saw a fuel trail behind me. The overflow tube coming out of the left carb is dripping every 10-15secs while riding but stops somewhat at idle. Is this a float prob, or needle and seat, or what. I have the clymer guide but im not carb friendly if you get my drift. Can someone help me out. Got a glamis trip coming up soon and with gas so high its a must fix.-Dan Quote
TeamRealtreeHD Posted August 11, 2008 Report Posted August 11, 2008 Sounds like a float problem to me. Adjust the float height and angle. That is typical of happening when the float messes up. Quote
OKCterror Posted August 11, 2008 Author Report Posted August 11, 2008 how do i do that, will my clymer manual walk me threw it ok Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.