TeamRealtreeHD Posted July 23, 2008 Report Share Posted July 23, 2008 Anybody ever do it? I powdercoated my warrior several years ago, and did everything but the a-arms do to the fact I couldn't get the ball joints out of them. Since the banshee a-arms are the same way, does anybody have any advice on how to get them out? I will not be doing this project until the winter, but I am trying to plan ahead. Also, what bearing is everybody running in their swingarms, etc? Mine are shot, and I was going to replace those as well since I'd have to take the old ones out anyways to paint the swingarm. Looking for good ones obviously. I ran All balls and Ams Oil bearing before... any others that are good? Thanks in advance guys! Quote Link to comment Share on other sites More sharing options...
BansheeKid15 Posted July 23, 2008 Report Share Posted July 23, 2008 Its not worth it. Some people that have PC'ed their stock a arms said that there is a plastic ring inside that will belt, and then your ball joint will be loose. I searched for it about a year or 2 ago, and i decided not to do mine. I have seen people PC theirs, but just a warning. There is no way to take the ball joint out of the stock a arms. Quote Link to comment Share on other sites More sharing options...
TeamRealtreeHD Posted July 23, 2008 Author Report Share Posted July 23, 2008 I didn't think you could remove them either. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.