tundish2800 Posted June 11, 2008 Report Posted June 11, 2008 DO you have to chage your jetting when you go to a smaller domes I'm taking a milled stock head off. I know i have to run race gas with the smaller. 1991 Banshee Paul Turner Hi Revs, Bored .020 over VF3 reeds and cages, K@N clamp ons head milled down .015 310 MAINS @ 27.5 PILOTS Douglas wheels with ITP hole shots Ricky's Stator +4 degrees and Ricky's Ignition Quote
KEVSWS6 Posted June 11, 2008 Report Posted June 11, 2008 DO you have to chage your jetting when you go to a smaller domes I'm taking a milled stock head off. I know i have to run race gas with the smaller. 1991 Banshee Paul Turner Hi Revs, Bored .020 over VF3 reeds and cages, K@N clamp ons head milled down .015 310 MAINS @ 27.5 PILOTS Douglas wheels with ITP hole shots Ricky's Stator +4 degrees and Ricky's Ignition No jetting changes needed for compression changes. Quote
gumby6t9 Posted June 11, 2008 Report Posted June 11, 2008 If I were you I would check your plugs after the first run and/or do a plug chop... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.