peterlocal22 Posted June 1, 2008 Report Posted June 1, 2008 guys im still working on my bros banshee. i put in a new billet propeller, new flywheel with adj. timing plate. the bike is a pain to start but it always was. so i through some starting fluid in and it started right up for 2 seconds then died. i did it again but this time gave it throttle, it started right up and reved right up then bogged out and died. same thing over and over with the choke in and with the choke out. what could the problem be? thanks peter Quote
lowbuckracing Posted June 1, 2008 Report Posted June 1, 2008 Hey Pete,Lowbuckracing here..Are you running the 2 into 1 set up I sold you?If so switch the carb out with yours and see if thats it..If it is send me the carb and I will upgrade that one ..Let me know,Thanks..JB Quote
peterlocal22 Posted June 1, 2008 Author Report Posted June 1, 2008 hey lowbuc, i have not yet installed your 2 into 1 onto this bike yet. im going to do that in a couple weeks. ill keep you updated when that happens. right now im just having problems with my bros bike. i sprayed some more starting fluid in and started it, this time gave it a good amount of throttle, it ran for 5 seconds rev up high then died? i also noticed after several attempts with the throttle open that my right leg got burnt on the stinger. then i touched the other stinger and it was only warm, not hot? Quote
peterlocal22 Posted June 1, 2008 Author Report Posted June 1, 2008 got it going now all i have to do is dial it in. one pipe seems to be pushing the exhaust out harder this normal? Quote
lowbuckracing Posted June 1, 2008 Report Posted June 1, 2008 sounds like the main is clogged on one side,try to switch plug wires to eliminate the coil or a wire being bad....let us know Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.