98_shee Posted May 30, 2008 Report Posted May 30, 2008 Can someone get me close on jetting this bike, mods are, 34mm pj's, cel needles middle clip, k&n pods with outerwears, trinity pipes, timing at +6, 18cc domes, not sure of the kind of port, ftz ported the cylinders, 4mill long rod, v2 reeds, elevation is around 1200 above, temp is around 80 to 90. Thanks Quote
98_shee Posted June 11, 2008 Author Report Posted June 11, 2008 Anyone?? I need a good starting point. Quote
Dick Wheels Posted June 11, 2008 Report Posted June 11, 2008 Anyone?? I need a good starting point. before i went to a single 34pj mine was cgj needles in the middle, 175 mains and 58 pilots at 70 above sea level. was a little rich on the pilots but was great with everything else. Hope that helps man. P.S. im still dicking around with this needle. its pissing me off. runs the same with the eej or the cgj needle. spudders and wont rev up about mid throttle Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.