banshee2 Posted May 27, 2008 Report Posted May 27, 2008 need to know how to synchronize my carbs help plz thanks Quote
06BaNsHeE Posted May 27, 2008 Report Posted May 27, 2008 http://www.bansheehq.com/forums/index.php?showtopic=95025 Quote
banshee2 Posted May 27, 2008 Author Report Posted May 27, 2008 http://www.bansheehq.com/forums/index.php?showtopic=95025 hey thanks for the help bro Quote
xXBlessedWithDeathXx Posted May 27, 2008 Report Posted May 27, 2008 That video pushed me to go in on one with pabansheematt. it probably took 3 minutes for idle and mid to be tuned. Props on that video. Quote
banshee2 Posted May 27, 2008 Author Report Posted May 27, 2008 That video pushed me to go in on one with pabansheematt. it probably took 3 minutes for idle and mid to be tuned. Props on that video. can u just tune it at idle or do u have to do both? and is there a certain level the vacum on each carb has to b set as or just if there at the same setting it dont matter? Quote
xXBlessedWithDeathXx Posted May 27, 2008 Report Posted May 27, 2008 can u just tune it at idle or do u have to do both? and is there a certain level the vacum on each carb has to b set as or just if there at the same setting it dont matter? you tune it at idle to a equal measurement and then you give it some gas and measure it off idle. i put a piece of electrical tape in where the adjuster meets the throttle to give it a good steady rev then measured them so they are equal on each side. the tool measures the air flow being sucked into the carb. you just need to adjust the idle and adjust barrel hight on the top of the carb to make them equal. its a killer tool. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.