RILS Posted May 4, 2008 Report Posted May 4, 2008 (edited) I have a 04 banshee 4 mill cub that has stainless trinity pipes, dual 34pjs,noss head 18cc domes,compression is around 190psi,protaper bars I have all the stock parts 2 sets of wheels and tires cub has about 8 hours plus break in i have the stock cylinders that are basicly new on stk bore 1 set of ported cylinders that are badass but are set up for stock stroke and they have about 10 hours on them on a 65 bore. I also have the stk crank,carbs,pipes,airbox,head serval sets of pistons some most of them are 65mm and about 30gallons of 111octane fuel ill let go with it if wanted. Bike may have 30 hours on it since new. Will get some pic asap. What do yall think its worth. The cub was set up by a&s "dan hull" racing and put together by me. It is a 65 bore 4mill welded crank it has the good bearing on the drive side and is a short rod setup never been on a dyno but is a bad mofo. It also has adustable timing plate. Edited May 4, 2008 by RILS Quote
RILS Posted May 4, 2008 Author Report Posted May 4, 2008 Will also consider trades for bassboat. Quote
RILS Posted May 4, 2008 Author Report Posted May 4, 2008 Will also consider trades for bassboat. The bike is located in ga will deliver anywhere in us for price. Surely there are some drag guys still outthere interested in a setup like this i havent been on the banshee sene in quite some time but a setup like this would cost between 7000 and 8000 without labor this one with all the extra parts and i left quite a few out that will go with it can be had for much less this is basicly a new banshee that was setup with 2 drag setups from new either setup will smoke any fourestroke ive ever come across on the drag.Ill take 6500obo for everything. Quote
RILS Posted May 4, 2008 Author Report Posted May 4, 2008 pics?? Give me a few ive got to clean all the dust off it its been sitting since last summer. Quote
RILS Posted May 4, 2008 Author Report Posted May 4, 2008 Give me a few ive got to clean all the dust off it its been sitting since last summer. Quote
RILS Posted May 4, 2008 Author Report Posted May 4, 2008 Is got the little tires on it because i was riding in the woods last. I had some prowedge2s but i sold them a while back. If somebody wants some better pics i will email them. The gearing is 16/41 i have a 15 and a 14 also. The only reason im selling it is because i want a bassboat and ive got 2 much stuff. Its a nice bike and was built right I have quite a few years expercience with 2 strokes from motorcross racing. I also have enough jets to tune it for about anywhere i dont remember whats in it but im about 900 above sea level. Quote
RILS Posted May 4, 2008 Author Report Posted May 4, 2008 Is got the little tires on it because i was riding in the woods last. I had some prowedge2s but i sold them a while back. If somebody wants some better pics i will email them. The gearing is 16/41 i have a 15 and a 14 also. The only reason im selling it is because i want a bassboat and ive got 2 much stuff. Its a nice bike and was built right I have quite a few years expercience with 2 strokes from motorcross racing. I also have enough jets to tune it for about anywhere i dont remember whats in it but im about 900 above sea level. Any reasonable offer will be considered. I can be reached at 706-318-6176. Quote
RILS Posted May 5, 2008 Author Report Posted May 5, 2008 Any reasonable offer will be considered. I can be reached at 706-318-6176. Maybe i should have put some flashy case covers and a swingarm on it so it would not only go fast it would sell fast too. bump Quote
snowmanzz13 Posted May 5, 2008 Report Posted May 5, 2008 i like that "stock" look that you have there, what would you be looking to get for a set of the jugs you said you have. Preferablly the ones that you say are bad ass, who did the porting and what kind of porting was done to it. And if your pricing them how much for the stock ones. thanks for your time Josh Quote
RILS Posted May 5, 2008 Author Report Posted May 5, 2008 i like that "stock" look that you have there, what would you be looking to get for a set of the jugs you said you have. Preferablly the ones that you say are bad ass, who did the porting and what kind of porting was done to it. And if your pricing them how much for the stock ones. thanks for your time Josh They were ported by a guy over at planetsand. They are drag ported i think the exhaust is around 194 the transfers were raised i dont remember what degree their at or his name. The transfers are opened up big time. I like the way they run for most cases over the cub they make hella power top to bottom last time i ran them I had the same setup thats on the bike now execpt stk crank and in 300ft dirt and the small tires i was smoking all the 450s and a cople of 2 wheel 250s. I really wasent planing to part the stuff out but yall can make me some offers and well see. I also have the set of pistons i was running with those cylinders they were bored to fit. You make a good offer on them and if u put them on and dont like them ill take em back and give u your money back as long as their not damaged I promiss if u jet them like i tell u youll want to keep them. Quote
snowmanzz13 Posted May 5, 2008 Report Posted May 5, 2008 let me see what my cash supply is at right now and i will get back at you in the A.M. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.