T5 jetting help in Mi

[chappy]

Alright to start with,I had LRD pipes on my shee all last year with Toomey 2into1 foam air filter and timing adjusted +4 with 320 mains and 3/4 turn out on the air screw stock needles on middle clip and it ran perfect all year.Well I changed to toomey T5's this year and tried running it with same settings in 70 degree weather and it bogs really bad when I hit the throttle.If while sitting still,I try to rev it up fast,it will try to stall or stall so I adjusted the air screw to 1/2 turn out and it got a little better but not even close to where its suppose to be.If I adjust them out,it will just stall.The stock pilots are still in it so should I try 27.5's?Should i try changing the needle position also?Elevation is around 600ft.

[fast banshee]

Alright to start with,I had LRD pipes on my shee all last year with Toomey 2into1 foam air filter and timing adjusted +4 with 320 mains and 3/4 turn out on the air screw stock needles on middle clip and it ran perfect all year.Well I changed to toomey T5's this year and tried running it with same settings in 70 degree weather and it bogs really bad when I hit the throttle.If while sitting still,I try to rev it up fast,it will try to stall or stall so I adjusted the air screw to 1/2 turn out and it got a little better but not even close to where its suppose to be.If I adjust them out,it will just stall.The stock pilots are still in it so should I try 27.5's?Should i try changing the needle position also?Elevation is around 600ft.

i would try moving the needle pos. on mine i took the air box led off and had to to move the clip to the last grove and the bog went aaway

[BansheeDan]

i would try moving the needle pos. on mine i took the air box led off and had to to move the clip to the last grove and the bog went aaway

 

try 310 mains 27.5 pilots and middle clip on the needle

 

im in michigan as well and thats where mine ran the best with t5's

 

 

Dan