what jet should i start with

[axlracing]

hey i am going to start rejeting my banshee this weekend it has pro circuit pipes 304 silencers reed spacers that i will probally take out stock carbs the main jets in it right now are 200 i am about 1000 feet above sea level what main jet should i start with i should'nt really need much help with the jetting as long as i get it close. I am going to have my wife pick up some main jets from the dealer when she comes home from work thanks AXL

[dajogejr]

Please list all the mods, including what kind of airbox, lid, filter setup you may be running.

[axlracing]

two uni stage 2 pod filters

[axlracing]

and what about these pilot jets someone said there special jets not just regular mikuni jets??

[trex banshee]

im right at 900 feet or something like that and on my stock bike with T5's i run stock pilots, needle in the middle and 310 mains. Cut stock air box with K&N.

[trex banshee]

and what about these pilot jets someone said there special jets not just regular mikuni jets??

 

yeah the blaster and banshee are the only ones who use them i believe, but your stock ones will be fine.

[axlracing]

my last quiestion i hope is how do you move the needle out to move the clip i do not have the t.o.r.s on it just caps. I had a polaris predator 500 it was easy just pulled the top of the carb off then the needle pulled right out thanks.

[trex banshee]

my last quiestion i hope is how do you move the needle out to move the clip i do not have the t.o.r.s on it just caps. I had a polaris predator 500 it was easy just pulled the top of the carb off then the needle pulled right out thanks.

 

just pull the top off like you said then you will have to unhook the slide from the cable then you will see two little screws, take them out and then you can just pull the needle out.