OIL ?

[98_banshee_newbie]

I have a question for you guys might be a little stupid just curious though. I run yamalube type R at a 24:1 just like the clymers says. I just bought some Klotz Benol and I am wandering what to run it on a stock shee with T6's. And why do you run such a high ratio? Thanks guys. I am just curios like I said and if it matters I run 93 octane.

[tooez]

I run benol in all my quads and my bike. I run 32:1. but I also run 110 octane race fuel. Love the smell of race fuel and benol. Mine are are bone stock. Except for fmf pipes. Benol recommend's 32:1 in all 2 stroke's. Even in the carts. Some people don't like it. I have run it for over 20 years and won't run nothing else. Here's some info.

 

BENOL CHARACTERISTICS: BeNol has a 25% greater film strength, higher load carrying capacity, and reduced varnishing properties than the lower grade AA castors.

 

 

 

Smoke Rating: 4-5

1=Fog

10=No Smoke

 

Clean Burn: 3-5

1=Heavy Deposits

10=No Carbon

 

Film Strength: 10

1=Failure

10=Virtually No Wear

 

Viscosity @ 100 F 950 - 1000 SUS 50W @ 40 C: 220cSt

Pour Point: 0 F

Flash Point: 520 F

Rust Prevention: Contains rust inhibitors

Certification: A.P.I. S.A. Intended for Racing Engines

Biodegradability: 100%

 

 

http://www.klotzlube.com/

 

 

http://klotzlube.com/storeProdDetails.asp?pi=6

 

 

Thanks EZ

[hillshooter421]

You might also want to try and running it at a 40:1 ratio, if you have any mods done to it or higher octane fuel.