Powder Coating/Ceramic Coating

[91tsiawd]

I've been waiting a couple months to see how my winter build actually performed before posting a review. So far the frame and misc parts that I had powder coated by JNZ finishing has held up very well to the harsh conditions I ride in (Coal Hill, Mt Carmel). There are obviously some sctaches on the under side of the frame from getting hung up on large rocks, but everything from the underside of the frame up shows no signs of wear and cleans up very easily due to the smooth finish of the powder coat.

 

I just recently sent my 2 into 1 Moto Fast Pipe to JNZ finishing to have Ceramic Coated (something new they are getting into) and so far the appearance of the pipe is a million times better than It was. I plan on seeing how well the ceramic coating holds up to being heated up and hit with water as I run through puddles, small streams, etc. They will be testing the coating on a few turbo cars as well to make sure there isn't any problems before they offer it to the public.

 

Overall my experience with JNZ finishing has been great, Fast turn around, decent prices, and top quality work. They are located in Hatfield, Pa and the Website which is finally up can be seen at JNZfinishing.com.

 

Below are a few pictures of the parts they have done for me a Set of Ceramic Coated Shearer Pipes will be in the future.

 

 

 

 

 

 

 

 

 

 

Ceramic Coated pipe

 

 

 

 

[xXBlessedWithDeathXx]

They look nice. there is a shop in sunbury that does ceramic and PC. they dont fuck off. the PC is amazing and i was told the ceramic blows but when i seen the pipes they looked really good. the pipes i believe were $90 and a frame is about $150 that includes sand blasting for both. very nice work.