BUILDING BANSHEE FROM FRAME UP NEED EVERYTHING

[bansheerider253]

i need almost everything except frame,plastics,axle let me know what you got looking for the best deal on some stock parts you might have lying around. i am also interesed in aftermarket parts. I dont need a stock swingarm or tires. let me know what you have and your price shipped 98303

[ramboner69]

i need almost everything except frame,plastics,axle let me know what you got looking for the best deal on some stock parts you might have lying around. i am also interesed in aftermarket parts. I dont need a stock swingarm or tires. let me know what you have and your price shipped 98303

i have some front hubs...sprocket hub brake disc hub...sterring stem gas tank..and some other misc stuff toss me an offer and there yours

[bansheerider253]

i have some front hubs...sprocket hub brake disc hub...sterring stem gas tank..and some other misc stuff toss me an offer and there yours

 

I have the axle hubs and the gas tank

 

do the front hubs have the brake discs?

 

will you take 25 shipped for the front hubs and steering stem shipped?

[ramboner69]

I have the axle hubs and the gas tank

 

do the front hubs have the brake discs?

 

will you take 25 shipped for the front hubs and steering stem shipped?

yes the have the rotors..25 shipped is a lil low im sure it will cost a lil bit to ship the stuff out

[bansheerider253]

yes the have the rotors..25 shipped is a lil low im sure it will cost a lil bit to ship the stuff out

 

sorry just thought i would throw out an offer $30 shipped let me know what you want

[ramboner69]

sorry just thought i would throw out an offer $30 shipped let me know what you want

let me weigh the stuff tomorrow and ill let you know

[banshee_man]

let me weigh the stuff tomorrow and ill let you know

i got a set of cyl mild port job i thank there 30 or 40 over i have one piston and rings they are a 65.0 i will take 225+shippin will do tradeing if you want it pm me

[bansheerider253]

i got a set of cyl mild port job i thank there 30 or 40 over i have one piston and rings they are a 65.0 i will take 225+shippin will do tradeing if you want it pm me

thanks but i am going to try and buy these cylinders off of my friend if i can convince him to sell them to me.

[tidos76]

i have a full front brakes from the disc's to the lever. all of it. i also have a few other parts i'll check when i get home and let ya know

[f4istunna]

This is whats left from my partout

 

 

 

 

-- Complete bottom end one fo the lower rod bearings shot (crank) no leaks, does have the usual shain damage to the outter edge of case but no where where it would cause problems. Comes w/ clutch, tranny etc (all internals) side covers etc. $250

 

-- 01 frame, straight good threads didnt notice any cracks bends or previous repairs, painted green $200 comes w/ original bill of sale

 

-- Front calipers with lines $30

--Front brake master cyl. with lever $20

--Set of 4 a arms (lower right has a pretty good dent, looks to be straight from what i can tell) $40 all 4 or $15 a peice sep. balljoints feel good

--Tie rods w/ ends $20

--Swingarm w/ carrier (was no play in bearings, and rolled good) $50

--Front shocks Springs chipped up $20

--Rear adjustable shock $25 works good looks decent

--Engine mounts/bars $5

--Rear sprocket hub $5

--Oem carbs complete $25

--Headlight/kill switch assembly $20

--Thumb throttle w/ cables $20

--Headlights $15 pair, were painted i cleaned them up could use lens polished (kinda dull)

--Swingarm pivot bolt $10

--One peice 7/8th handebars black not sure brand $5

--Oem clutch lever and perch $5

--Ignition switch w/ key $10

--Open intake w/ uni filter (looks like stock airbox cut away ??) $10

--Plastics Blue , fronts cut rear full w/ radiator and handlebar peice $80

--oem front wheels $55

--oem rear wheels $55

--Itp front wheels few dings $55

 

Let me know if interested in anything

 

Thanks

[02BANSHEEE]

how good a shape are the rear wheels in . and is that shipped

 

 

 

-- Complete bottom end one fo the lower rod bearings shot (crank) no leaks, does have the usual shain damage to the outter edge of case but no where where it would cause problems. Comes w/ clutch, tranny etc (all internals) side covers etc. $250

 

-- 01 frame, straight good threads didnt notice any cracks bends or previous repairs, painted green $200 comes w/ original bill of sale

 

-- Front calipers with lines $30

--Front brake master cyl. with lever $20

--Set of 4 a arms (lower right has a pretty good dent, looks to be straight from what i can tell) $40 all 4 or $15 a peice sep. balljoints feel good

--Tie rods w/ ends $20

--Swingarm w/ carrier (was no play in bearings, and rolled good) $50

--Front shocks Springs chipped up $20

--Rear adjustable shock $25 works good looks decent

--Engine mounts/bars $5

--Rear sprocket hub $5

--Oem carbs complete $25

--Headlight/kill switch assembly $20

--Thumb throttle w/ cables $20

--Headlights $15 pair, were painted i cleaned them up could use lens polished (kinda dull)

--Swingarm pivot bolt $10

--One peice 7/8th handebars black not sure brand $5

--Oem clutch lever and perch $5

--Ignition switch w/ key $10

--Open intake w/ uni filter (looks like stock airbox cut away ??) $10

--Plastics Blue , fronts cut rear full w/ radiator and handlebar peice $80

--oem front wheels $55

--oem rear wheels $55

--Itp front wheels few dings $55

 

Let me know if interested in anything

 

Thanks

[06BaNsHeE]

I got 2 PLus 6 swingarms.A stock carrier one and a round carrier one.135 Shipped and 270 Shipped(BRAND NEW).LMK

Edited March 18, 2008 by 06BaNsHeE