Rev Launch Limiter

[91tsiawd]

I've searched the forum and a few other forums for the last couple of hrs looking for a post on how to wire the Dynatek CDI (97+ models) for a Rev Launch Limiter. If anyone has seen a write up on this or has personally done this I'd love to hear a break down on how to wire the bike. My Plan is to order a switched clutch lever from Pingel and use that.

 

Hopefully I'll have better luck here than I have had on the Dynatek and Planet Sand web sites.

[Dave I.]

http://cgi.ebay.com/ebaymotors/BANSHEE-YFZ...38670QQtcZphoto

 

http://www.planetsand.com/forums/ubbthread.../771799/fpart/1

 

http://secure.mycart.net/catalogs/catalog....;showprevnext=1

[91tsiawd]

http://cgi.ebay.com/ebaymotors/BANSHEE-YFZ...38670QQtcZphoto

 

http://www.planetsand.com/forums/ubbthread.../771799/fpart/1

 

http://secure.mycart.net/catalogs/catalog....;showprevnext=1

 

 

Thanks for the information, I've actually talked to Dynatek and I think I have things figured out. Dynatek informed me I'm to use the single brown wire coming out of the Dynatek to plug into the switched clutch lever.

 

Once I get the bike running and my clutch lever comes in I'll post something about how it works, and any problems I ran into along the way.