hard start

[8650mustang]

I have an 01 banshee, I have a hard time getting it started, can kick it for every and wont start. If i spray starting fuild in the carbs it will start. After it runs for a bit it will start all day with no problem. Just looking for a little help. Thanks

[Hilarious]

How is your jetting? Any mods?

I know my banshee was like that after I got it.

Then I adjusted my jetting and air screws and

it ran very well from there on. :shrug:

[8650mustang]

just cool heads and toomy pipes, I have played with the carb but didnt help

[fixitrod]

Did it start doing that when it was cold?

Will it start if you open the throttle?

Is the tube between the carbs?

Are you using the choke ?

Is your filter clean... or at least not ridiculously dirty?

Is your idle set decent?

Is your gas old?

Are the carb caps tight?

 

Sounds like the pilot screws need adjusted though... I agree.

 

Just some simple things to start with.