HKIC Posted November 11, 2007 Report Share Posted November 11, 2007 when i finally got my bike running today, we noticed it was dripping engine ice out of the bottom of the engine. it was only two screws it was dripping from and everything is torqed down to specs. help would be greatly appreciated thanks Quote Link to comment Share on other sites More sharing options...
Dave I. Posted November 11, 2007 Report Share Posted November 11, 2007 Wow, you expect anyone to be able to help you with that question. How about a little more detail.....leaking water out of 2 screws.......okay. Quote Link to comment Share on other sites More sharing options...
HKIC Posted November 11, 2007 Author Report Share Posted November 11, 2007 sorry, the bike runs fine, but a few drops of engine ice come from the two center screws on the bottom of the engine... Quote Link to comment Share on other sites More sharing options...
jmd0346 Posted November 11, 2007 Report Share Posted November 11, 2007 Huh? Still not getting it. There are no screws. Lets talk nuts and bolts. Do you mean there is colant leaking from the nuts from the bottom of the engine cases? Quote Link to comment Share on other sites More sharing options...
HKIC Posted November 11, 2007 Author Report Share Posted November 11, 2007 yea, its leaking from the middle 2 nuts on the bottom of the case. Quote Link to comment Share on other sites More sharing options...
jmd0346 Posted November 11, 2007 Report Share Posted November 11, 2007 You sure its not coming form the heads and running down and appearing to come for the bottom nuts. There shouldnt be coolant coming from those nuts. There are no coolant passages around that area. Quote Link to comment Share on other sites More sharing options...
ClimbAnyHill Posted November 11, 2007 Report Share Posted November 11, 2007 (edited) Check the coolant tube that goes thru the case. It will leak, go thru the drains & drip under the cases.. Oring seal might be broken. Edited November 11, 2007 by ClimbAnyHill Quote Link to comment Share on other sites More sharing options...
FireHead Posted November 11, 2007 Report Share Posted November 11, 2007 Check the coolant tube that goes thru the case. It will leak, go thru the drains & drip under the cases.. Oring seal might be broken. Word. Unless your crank chamber is full of coolant, those two studs are not where the coolant is actually coming from. :geek: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.