2strokepat Posted October 4, 2007 Report Posted October 4, 2007 I just bought the parts to do the 2-1 setup and I was wondering if anyone could give me a starting point for the jetting. my banshee has fmf fatty exhaust, boysen reeds, bored out a little and the head is shaved down a litte and have 35mm pwk carb for the app. were I live is about 500 ft. above sea level. Quote
Snopczynski Posted October 4, 2007 Report Posted October 4, 2007 185 main jet, get both a dek and eek needle and set the dek in middle clip position to start. 45 pilot jet, 1.5 turns out on air screw. Adjust needles accordingly, then sit the pilot and air screw. Main jet should be super close to perfect. Quote
2strokepat Posted October 4, 2007 Author Report Posted October 4, 2007 185 main jet, get both a dek and eek needle and set the dek in middle clip position to start. 45 pilot jet, 1.5 turns out on air screw. Adjust needles accordingly, then sit the pilot and air screw. Main jet should be super close to perfect. Thanks for the help. Do you know where I can buy the needle and thumb throttle cable? I was wondering if I could use one from another quad like a blaster or do they make one for this application. Quote
Snopczynski Posted October 4, 2007 Report Posted October 4, 2007 you can probably get the needles from cascade innovations. They also sell the cables. Cascade Innovations Link Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.